Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

WIRING HELP NEEDED CLUTCH CUT OUT SWITCH FOR STARTING

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Padders
Hardcore
Hardcore
Posts: 4875
Joined: 15th Jan 2006
Location: Grimsby Lincolnshire

WIRING HELP NEEDED CLUTCH CUT OUT SWITCH FOR STARTING

#1 PostAuthor: Padders » Fri Sep 09, 2011 6:51 am

Hi I have fitted a differant clutch lever housing on my GPZ1100B1 that does not have a connection for the clutch/starter wiring, the small switch that is depressed when you pull the clutch lever in when started the bike. Can this be bypassed / wired to be on etc. Any advice greatfully recieved.

Cheers
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2233
Joined: 21st Oct 2007
Location: Farnbronx Sin City N.E. Hants

#2 PostAuthor: Al » Fri Sep 09, 2011 7:04 am

If its wired the same as the H then follow the wires from the switch back to where it joins the loom under the tank and pull those two wires out. Join across and the switch is now out of circuit.

AL
1981 J1
Top
User avatar
KeithZ1R
Moderator
Posts: 3368
Joined: 15th May 2005
Location: Bury

#3 PostAuthor: KeithZ1R » Fri Sep 09, 2011 7:08 am

Two black connections under the tank like the man says Ian join em together
:)
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
HowieD
100Club
100Club
Posts: 336
Joined: 5th Feb 2008
Location: Lincoln

#4 PostAuthor: HowieD » Fri Sep 09, 2011 8:36 am

Padders,

if it is the same arrangement as a Z1-R then the switch MAKES the Starter Circuit when the leaver is pulled in, the other component is the Starter button.

In than case the two wires that the switch would have connected too can be connected together and the Starter button only will make the curcuit.


Regards
Howie
CD185, Maggot, Z1-R, Horace
Top
Padders
Hardcore
Hardcore
Posts: 4875
Joined: 15th Jan 2006
Location: Grimsby Lincolnshire

#5 PostAuthor: Padders » Fri Sep 09, 2011 8:47 am

Thanks guys for the advice.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests