Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
indicator relay
Moderators: KeithZ1R, chrisu, paul doran, Taffus
indicator relay
does the power to the indicators travel throught the flasher relay before the switch or after the switch/ cannot get power at the bars.
Do the lights come on and dont flash
then the contacts have welded shut, or if the dont come on at all peel it open carefully a the bottom, it may well be the the bi-metal strip is stuck open they get a bit tired after a while. if your gentle you can "adjust it" so it touches and then it should be ok
..........or if you cant be arsed just get a new one 



Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013


You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
Who is online
Users browsing this forum: No registered users and 14 guests