does any body know some one that can either drill out and or re tap and insert an exhaust stud with the head on the bike
i have one stud missing that was replaced with a bolt but the thread has failed and the bolt has no grip
Any takers if your not to far away i could ride it any further i would van the bike possibly a good little earner for someone ?
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
GPZ 1100 unitrack
Moderators: KeithZ1R, chrisu, paul doran, Taffus
it is quite an easy job to do yourself if you have some mechanical knowledge just purchase a 8mm re coil kit from e bay + a long series drill bit drill out the existing thread with the re coil recommended drill size. then insert the coil with the special tool that come with the kit job done . kits are about £22 on e bay
Who is online
Users browsing this forum: No registered users and 13 guests