Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Pigford - Mk.II Sprinter (monologue)

Work in Progress

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

Pigford - Mk.II Sprinter (monologue)

#1 PostAuthor: Pigford » Tue Jun 14, 2011 6:03 pm

Started with this ropey old 1980 Z1000A4 (Mk.II)....

Image

Stripped it, powder coating here & there, GPz forks, GSXR wheels & s/arm...

Image

Image

Image



GPZ1100 head - new over sized valves & guides, gasflowed, APE idler gear conversion....

Image

Image

...and an Orient Express 1392cc big block (2nd hand off Rob Zed1015)..


Image


Image

Painted engine...

Image

Rolling chassis with half a motor stuffed in it....

Image

Got it finished & all bolted together. More or less as it is today....


Image

Image

Image

Image

Image

Image

Image

Image

Image

Just need to get carbs tuned in & do a shakedown run - but been uber busy last little while :roll:
And on the 7th day... Zeds were created!

User avatar
chrisNI
Site Admin
Posts: 2316
Joined: 22nd Dec 2001
Location: NI

#2 PostAuthor: chrisNI » Tue Jun 14, 2011 11:30 pm

There's more here than there was the first time :D :D :D

User avatar
Mark Stratton
Custard Cream
Custard Cream
Posts: 574
Joined: 16th Feb 2009
Location: Southampton

#3 PostAuthor: Mark Stratton » Wed Jun 15, 2011 6:01 pm

Looking real good Pigford.

Can't wait to see the video of the first couple of runs :wink:

kawman736582

#4 PostAuthor: kawman736582 » Mon Jul 04, 2011 11:30 am

turned out good mark..

User avatar
bart
Regular Poster
Posts: 84
Joined: 24th May 2007
Location: carlisle

#5 PostAuthor: bart » Mon Jul 04, 2011 2:02 pm

Looking mighty fine. :xbou

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#6 PostAuthor: Pigford » Mon Jul 04, 2011 5:10 pm

Must admit - it's more or less ready bar the final sorting of getting it running right.... :!:


But life gets in the way sometimes and I have been side-tracked :roll:


.... wifey being made redundant, granddaughters 1st birthday, son & daughter borrowing money, busy at work..... :cry:


Might get a chance to look at it this weekend :twisted:
And on the 7th day... Zeds were created!

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#7 PostAuthor: Ginger Bear » Mon Jul 04, 2011 9:15 pm

Keep at it Piggy............. You'll get there. :)

Sorry to hear about all the 'side issues' :?? :??
Image

# 104

Phil Churchett Award Winner 2011 & 2016 :D
Buzzworkz Best Modified Zed 2016

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#8 PostAuthor: Pigford » Sun Jul 17, 2011 9:59 am

Well, Shock - Horror - Hold the front page (Mr Murdoch) :shock:


I spent an hour out in the garage with the Mk.II.


Didn't do hell of a lot (coz its raining) but I fitted a pair of "quick release" fuel line things to speed up carb setting......

Then I re-torqued the head after I ran it a few weeks back - and they needed a good 1/2 turn (30 ft/lb).

I then fitted some new Denso Iridium plugs and started the fooka up and ran it for a few minutes :!:

Theres still a weep from the front of the cam chain tunnel :cry: and shes running weak - need the choke on full and still don't smoke :wink:

If truth be told I'm not planning to run her this year to give me time to get her sorted for 2012 :roll:
And on the 7th day... Zeds were created!

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#9 PostAuthor: Ginger Bear » Sun Jul 17, 2011 10:45 am

No point rushing these things Piggy......... Take your time & get it right I say.

Let me know if you need any 'Pit crew' for 2012 :up
Image



# 104



Phil Churchett Award Winner 2011 & 2016 :D

Buzzworkz Best Modified Zed 2016

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#10 PostAuthor: Pigford » Sun Jul 17, 2011 11:18 am

Ginger Bear wrote:No point rushing these things Piggy......... Take your time & get it right I say.

Let me know if you need any 'Pit crew' for 2012 :up



May just take you up on that Bear :wink:
And on the 7th day... Zeds were created!

User avatar
Ginger Bear
Hardcore
Hardcore
Posts: 6850
Joined: 16th Dec 2008
Location: In the Dark.
Contact:

#11 PostAuthor: Ginger Bear » Sun Jul 17, 2011 11:22 am

Well that's that then......... 'Team Pig' may well have just been born. :shock:
Image



# 104



Phil Churchett Award Winner 2011 & 2016 :D

Buzzworkz Best Modified Zed 2016

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#12 PostAuthor: Pigford » Sun Jul 17, 2011 2:31 pm

OINK :P
And on the 7th day... Zeds were created!

User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:

#13 PostAuthor: pertonpc » Sun Jul 17, 2011 6:35 pm

Nice work Mark :wink:
Are we going to see that beast at Santa Pod in 2012???

User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#14 PostAuthor: Pigford » Sat Mar 31, 2012 5:57 pm

Did a bit to the Sprinter today - gonna get stuck into it over Easter .......


Image



Just need to get it running proper like :wink:
And on the 7th day... Zeds were created!

Is Vic There
Hardcore
Hardcore
Posts: 1460
Joined: 8th Nov 2011
Location: Brisbane, Australia.

#15 PostAuthor: Is Vic There » Sat Mar 31, 2012 10:35 pm

Loverly stuff, have you any picture of the 900 in the back ground, or a thread? Would'nt mind a read of would you have done to that!
Z1000R ELR, Z1100R ELR, GPz900R A1, GPz750 Turbo, Norton F1, Harris Mag 2, Harris Mag 5, Yamaha YZR750SP, Triumph Steve McQueen, Suzuki RGV250 Sheene Rep, Suzuki RG500 Walter Wolf, Suzuki RG250 Walter Wolf, Aprilia RS250, Yamaha YL1, RG500. H**** NS400.


Return to “Projects”

Who is online

Users browsing this forum: Bing [Bot] and 13 guests