never has these before, always had the fiber ones so which round do they go in?
is it the flat edge to the cylinder head or the beveled edge.
and am i right in saying i read something about heating them up first
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Which way round
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Which way round
Got some new exhaust gaskets from zpower copper ones
never has these before, always had the fiber ones so which round do they go in?
is it the flat edge to the cylinder head or the beveled edge.
and am i right in saying i read something about heating them up first
never has these before, always had the fiber ones so which round do they go in?
is it the flat edge to the cylinder head or the beveled edge.
and am i right in saying i read something about heating them up first
Making the world a shiny place with a factory finish
-
wilsonsjw11
- Hardcore
- Posts: 1317
- Joined: 18th Jul 2008
- Location: West Sussex/Central London
I put them flat to the head with a bit of grease on them to hold them in place. They are filled with fibre rope (used to be asbestos) and heating them won't do much good - exhaust sealer paste does 
re-tighten after 50 miles when the engine has cooled down.
re-tighten after 50 miles when the engine has cooled down.Rich
diplomacy is a form of art - I was never any good at art
diplomacy is a form of art - I was never any good at art
Who is online
Users browsing this forum: No registered users and 15 guests