Ideally BILLET, but rubber will do...... I'm having trouble logging on here from my own computer, so have to sneak on in work time!
Call me on 07970 958411
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
J / GPz cam end caps
Moderators: KeithZ1R, chrisu, paul doran, Taffus
J / GPz cam end caps
I'M AFTER A SET (4) of J motor (square) cam end caps/plugs.
Ideally BILLET, but rubber will do...... I'm having trouble logging on here from my own computer, so have to sneak on in work time!
Call me on 07970 958411
Ideally BILLET, but rubber will do...... I'm having trouble logging on here from my own computer, so have to sneak on in work time!
Call me on 07970 958411
And on the 7th day... Zeds were created!
-
ade woollams
- Custard Cream
- Posts: 505
- Joined: 5th Mar 2007
- Location: within the smoke n the burnout zone
dont think you can get billet ones for these motors ,i looked when i done my motor .kawasaki do the rubber ones and another style that have an aluminum outer cover over the rubber and thats what i used . i did think about getting some made but it was a pain with the angle outers, thes are fine just a smear of silicone and refit each time.
dragracing, because it takes more than one ball !!!!!!!!!!!!!!!
http://www.youtube.com/watch?v=pNoktjNP ... ture=share
http://www.youtube.com/watch?v=pNoktjNP ... ture=share
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Who is online
Users browsing this forum: No registered users and 13 guests