I had cause to go into my tool kit this year for the first time for years, and found that the nut & bolt, which holds the pliers together had disappeared. I have tried afew odd nuts/bolts combinations but obviously not the right size as I can’t get them to work properly. I suspect the bolt shaft is different diameter (and not threaded),to bit the nut screws on to.
Can anyone confirm this, or post a pic, or better still,- has anyone got this item spare, that they would be happy to part with in exchange for dosh.
Cheers
Kevin
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Tool Kit Bit
Moderators: KeithZ1R, chrisu, paul doran, Taffus
02GF74 wrote:if you are not bothered about originalily, can you not drill out the hole in the pliers?
and you have tried metric and imperial bolts?
or you could use a bolt and a sleeve so it is a snug fit.
OOh you devil, TLC will be along soon to sort you out!
He'll be able to confirm whether you need a number '7' or '4' bolt and what the correct plating should be...... (\__/)
(='.'=)
(")_(")
(='.'=)
(")_(")
-
phil churchett
- Hardcore
- Posts: 3009
- Joined: 28th Mar 2003
- Location: Warwickshire
Taffus wrote:02GF74 wrote:if you are not bothered about originalily, can you not drill out the hole in the pliers?
and you have tried metric and imperial bolts?
or you could use a bolt and a sleeve so it is a snug fit.
OOh you devil, TLC will be along soon to sort you out!
Four pipes rule, anything else is second best.
Who is online
Users browsing this forum: No registered users and 21 guests