Question is will genuine Kawasaki +0.5mm rings fit the ART pistons?
Physically the pistons look identical to OEM.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1B Piston Rings
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Z1B Piston Rings
Got +0.5 mm pistons in my Z1B, these are made by a company called ART, found them on internet but don't do pistons/rings for Z1B now.
Question is will genuine Kawasaki +0.5mm rings fit the ART pistons?
Physically the pistons look identical to OEM.
Question is will genuine Kawasaki +0.5mm rings fit the ART pistons?
Physically the pistons look identical to OEM.
AKA John Roscoe. PUM #028
1975 Z1B, 2013 Z800
1975 Z1B, 2013 Z800
I have seen many ART pistons in Z series, as a matter of fact, I think they are the main supplier of pistons for Kawasaki. So if the rings fit in the piston groove, they will be OK!
There is another question, that is; will 0.5mm rings be OK for a standard (but worn bore)? I say yes! As long as the gap is adjusted.
Don't no about 1.0mm rings in the same situation.
RegardZ.
There is another question, that is; will 0.5mm rings be OK for a standard (but worn bore)? I say yes! As long as the gap is adjusted.
Don't no about 1.0mm rings in the same situation.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Who is online
Users browsing this forum: No registered users and 17 guests