Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Starter Clutch

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
martinz1b
100Club
100Club
Posts: 473
Joined: 29th Jun 2008
Location: Yorkshire

Starter Clutch

#1 PostAuthor: martinz1b » Sat Aug 29, 2009 11:43 am

I have just tried to start a Z1000 motor I bought a few years ago and of course the starter motor spun wildly :cry: I have the tool to remove the rotor and was wondering if it is a complicated job to fit a repair kit to the starter clutch, I seem to remember reading somewhere that is is best left to the experts. Can anyone tell me if this is so.

Cheers
Mart
Top
User avatar
PJ
Hardcore
Hardcore
Posts: 3538
Joined: 2nd Dec 2008
Location: Halesowen, West Mids

#2 PostAuthor: PJ » Sat Aug 29, 2009 2:03 pm

Hi Mart

If you are good with the spanners easy peasy, the only fiddly bit is the springs and throw out weights.

Just get the rotor off, and replace whatever is needed, if you take out the allen bolts, make sure you loctite them back in, also make sure the key is in the crank when refitting the rotor


:D
WHO NEEDS DRUGS - WHEN YOU HAVE A ZED!!
Top
User avatar
martinz1b
100Club
100Club
Posts: 473
Joined: 29th Jun 2008
Location: Yorkshire

#3 PostAuthor: martinz1b » Sat Aug 29, 2009 2:14 pm

Thanks, yeah no problem with the spanners. It was just that I had heard it was difficult to repair the starter clutch assembly. I will have a pop at it.

Have you sent me a PM, I saw that I had one in my inbox and when I opened it the message was gone :?:

Regards
Mart
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#4 PostAuthor: Pigford » Sat Aug 29, 2009 5:07 pm

You can get 'repair kits' for the starters, which has new rollers & springs...

Z1Enterprises or ZPower should do them :wink:
And on the 7th day... Zeds were created!
Top
User avatar
martinz1b
100Club
100Club
Posts: 473
Joined: 29th Jun 2008
Location: Yorkshire

#5 PostAuthor: martinz1b » Sat Aug 29, 2009 5:12 pm

Pigford wrote:You can get 'repair kits' for the starters, which has new rollers & springs...

Z1Enterprises or ZPower should do them :wink:


Thanks for that, I will pull it apart and see what the problem is, I have heard that the rotors can come loose and cause this :?:

Cheers
Mart
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#6 PostAuthor: Pigford » Sat Aug 29, 2009 5:13 pm

When the rotor comes loose.... its usually quite evident - lots of rattling & rumbling :shock: Depending how long & how loose :!:
And on the 7th day... Zeds were created!
Top
User avatar
martinz1b
100Club
100Club
Posts: 473
Joined: 29th Jun 2008
Location: Yorkshire

#7 PostAuthor: martinz1b » Sat Aug 29, 2009 5:23 pm

Pigford wrote:When the rotor comes loose.... its usually quite evident - lots of rattling & rumbling :shock: Depending how long & how loose :!:


Yeah I would have thought so, but this is an engine I bought a couple of years ago and have not tried until now. I am just testing it while I am rebuilding my 900 motor. If it is good I will tidy it up and keep it for my other project.

Mart
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests