Oil Pressure gauge.

[bigmac103]

Put me down for one!

[GUYZED]

I'll have one

[noelmcguinnessz900]

put me down for 2 cheers noel

[Big Fluff]

Hey we're doing well guys.... 11 up to now

I haven't a clue about 'import duty', or if there will actually be any, but I'll confirm what I can with the suppliers.

If we can get up to 20 then I'll place the order and will have to sell the extra 5 on myself to recuperate the cost.
I will however require monies up front, either by cheque or paypal.
I consider myself to be most trustworthy and will make sure we get the best deal possible.

Regards, Will

[martinz1b]

Put me down for one as well please.
Mart

[hillbilly]

ile have one let me know when you need payment.

[lta01]

Will, I'll have one please.

Some US suppliers describe the goods as commercial or marketing samples , which means they don't attract any duty usuallly.

[BShaw]

I will however require monies up front, either by cheque or paypal.

No problem, as soon as you want it shout, I am on holiday from 8th till 18th sep, but am sure we will know by then. will order include angles ?
Baza

[Big Fluff]

Will the order include the angles ?
Baza

Baz - They don't include the 90° elbow, nor can they supply one.
However, as soon as I get a gauge, I could source the required parts including drill & cutting tap. We could then take it in turns to do the necessary mod, then post on to each other member who bought a gauge so they can finish the job.
Will.

[BShaw]

Will, Sounds good to me, whatever I can do.
Thanks for sorting all this out. I just hope we get enough takers.
Regards
Baza

[Gus]

Is there anything wrong with these?

http://cgi.ebay.co.uk/63mm-Hydraulic-Pr ... 8001r12082

http://www.speedflowshop.co.uk/0-to-15- ... 1109-p.asp

[zed1015]

Is there anything wrong with these?

http://cgi.ebay.co.uk/63mm-Hydraulic-Pr ... 8001r12082

http://www.speedflowshop.co.uk/0-to-15- ... 1109-p.asp

The 63mm one off evilbay is too big, not glycerine filled and cheap and nasty but the speedflowshop one looks good. At 1-5/8ths (40mm) its spot on and looks good quality. Will still need a 90 deg angled fitting though.

[Big Fluff]

Update from Marshall in the states.....
There will be VAT on top and maybe import duty too.

The one Gus found by Speedflow is the same exact gauge as the Marshall one, just different text. The needle shape, screws, everything is identical. Price is £23.32. Contact Speedflow on 0870 225 0097.

To be honest, I think this would be a better move than to order a job lot from the states. After the VAT has been added, and possible inport duty, there won't be anything between them price wise. Also, If I order from the states, I may be left with gauges I can't sell if we don't get enough takers.

Here's the Marshall one again....


and here's the Speedflow one.


See, exactly the same.
As with both, you'll still need a 90 degree fitting. There's a hydraulics company just around the corner from where I work, I know the bloke who runs it so could get a deal on the fittings.
I'm going to order one for myself and I'll let you all know of the fitting/tap required etc, unless Zed1025 beats me to it

Hope you all understand, Regards, Will.

[martinz1b]

Yeah, no problem. It seems a lot of hassle for little gain, I will probably buy one from speedflow. I will watch out for your update about the bends.

Thanks
Mart

[BShaw]

Yep you'r probably right Will, but thank you for chasing it up and offering to put the dosh up and sort things out etc, Soooo much hassle from the states.(what if one or two didn't work ?)
Let me know about the 90.
Cheers mate