Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

revs hanging a little

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
knut
100Club
100Club
Posts: 427
Joined: 24th Jun 2007
Location: cork,Ireland

revs hanging a little

#1 PostAuthor: knut » Sun Aug 23, 2009 9:42 pm

hi ,a question for the collective please,
what,s the most likely cause for the revs to just
hang for a sec after shutting the throttle ?
oops forgot the bike is z1000 a1,standard apart from
harris exhaust.also running standard air box and filter,
i,ve cleaned the slides and throttle cables and checked
the spring etc it,s snapping closed properly,
i,ve also checked the timing( static) at fully advanced
which is ok, should i retard it a little maybe ?

any help appreciated guys
what,s there to say except we,re all mad on here.
Top
User avatar
MaineKZ
Custard Cream
Custard Cream
Posts: 792
Joined: 30th Aug 2005
Location: A safe distance from High Wycombe

#2 PostAuthor: MaineKZ » Sun Aug 23, 2009 10:22 pm

Hi knut

This is usually caused by an air leak on the engine side of the carbs which causes induction to continue after throttle closing. Most common cause is failed airseal at the carb inlet rubbers.
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#3 PostAuthor: Pigford » Mon Aug 24, 2009 7:26 am

:??

AS JUST SAID... BUT IN MY LAWSON'S CASE...... :roll:
And on the 7th day... Zeds were created!
Top
User avatar
knut
100Club
100Club
Posts: 427
Joined: 24th Jun 2007
Location: cork,Ireland

#4 PostAuthor: knut » Mon Aug 24, 2009 10:32 am

thanks guys ,the rubbers don,t look too bad but guess it,s time for some new ones.
what,s there to say except we,re all mad on here.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests