Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Blueing of pipes

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Dodgy Z1B
100Club
100Club
Posts: 401
Joined: 18th Apr 2007
Location: Renfrewshire, Scotland
Contact:
Contact Dodgy Z1B

Blueing of pipes

#1 PostAuthor: Dodgy Z1B » Mon Mar 23, 2009 7:56 am

The middle two downpipes are blueing up but the outer two arent does this suggest carbs are out of balance or just thinner chrome :)
Image
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Mon Mar 23, 2009 10:14 am

Hmmmmmm, centre pots always run a bit hotter.... It's not unknown for #3 & 4 to run on slightly larger jets in the racing arena :wink:

As this is tied in with "coils" too, best to double check timing :!:
And on the 7th day... Zeds were created!
Top
GEZ635
100Club
100Club
Posts: 396
Joined: 12th Mar 2002
Location: BIRMINGHAM

#3 PostAuthor: GEZ635 » Mon Mar 23, 2009 4:37 pm

Most of the repro pipes I have used tend to blue a little . Never have the problem with my original pipes with the thicker downtubes. Bluejob polish does a great job of getting the blue marks off if its any help
Gez
Top
Rich
Hardcore
Hardcore
Posts: 2835
Joined: 4th Mar 2003

#4 PostAuthor: Rich » Mon Mar 23, 2009 5:57 pm

The originals were probably double skinned.

Piggy - 2&3 are the middle ones :wink:
Rich
 diplomacy is a form of art - I was never any good at art
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#5 PostAuthor: PAULJAC47 » Mon Mar 23, 2009 6:16 pm

Hi i would try a gunson colourtune to see if all the pots are burning the same,
Do the centre two plugs have a different clour to the outer two? Cheers Pauljac...
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#6 PostAuthor: mikey » Mon Mar 23, 2009 6:58 pm

PAULJAC47 wrote:Hi i would try a gunson colourtune to see if all the pots are burning the same,
Do the centre two plugs have a different clour to the outer two? Cheers Pauljac...


Spot on mate maralyn done my A2 with a colour tune yesterday as my No 1 exhaust was blueing more than the rest and it was running a tad lean thanks for that by the way paul.
Making the world a shiny place with a factory finish
Top
User avatar
AL MARSHALL
100Club
100Club
Posts: 369
Joined: 13th Feb 2007
Location: BURTON ON TRENT/ TAMWORTH

blueing

#7 PostAuthor: AL MARSHALL » Tue Mar 24, 2009 10:11 am

hey dodgy....if you try a bit harder you should be able to blue the outer ones as well :lol: :lol:
trouble.......seek and ye shall find
www.z-clocks.co.uk
Top
Steve Cooke
Hardcore
Hardcore
Posts: 1612
Joined: 18th Mar 2007
Location: Southampton

#8 PostAuthor: Steve Cooke » Tue Mar 24, 2009 9:40 pm

Yeah get them all to blue up they look much better. :)
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 3792
Joined: 29th Nov 2005
Location: bristol

#9 PostAuthor: mikey » Tue Mar 24, 2009 10:01 pm

Least it shows the bikes being used
Making the world a shiny place with a factory finish
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests