Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

reproduction wiring looms

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
z2.john
Custard Cream
Custard Cream
Posts: 500
Joined: 17th Mar 2005

reproduction wiring looms

#1 PostAuthor: z2.john » Mon Feb 25, 2008 9:19 am

Anyone used the repro Z1 wiring looms on a Z900? Was wondering if the change of wiring run from the RH side cover on Z1 to LH on the Z900 causes any problems?
Cheers
John
Top
cra-z1

#2 PostAuthor: cra-z1 » Sat Mar 01, 2008 6:13 am

I used a reproduction on my 73Z1. found it to be a good product. Not sure about the other half of the question
Top
User avatar
Garn 1
ZedHead
ZedHead
Posts: 1234
Joined: 23rd Sep 2005
Location: Sydney

#3 PostAuthor: Garn 1 » Sat Mar 01, 2008 9:08 pm

John, I believe you would have to modify the Z1 series loom significantly, to make it work. The difference is mainly in getting the extra Z900 fuses in the circuit, hence getting the wires to the position of the original fuse box. It could be made to work by ingnoring these fuse or installing them individually elsewhere.
Read BigFluff comments at "Z thou A1 Loom " (Bike Help a few pages back)*.
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 11 guests