Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

over shift bushing

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
stubby
Regular Poster
Posts: 15
Joined: 1st Jul 2011
Location: east yorks , patrington

over shift bushing

#1 PostAuthor: stubby » Fri Aug 16, 2013 10:57 am

where exactly does the bush fit on the transmission
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#2 PostAuthor: zed1015 » Fri Aug 16, 2013 11:31 am

Are you fitting an air shifter ? as you only really need it if you are.
It goes on the end of the selector fork shaft behind the inner case that holds all the seals for the output shaft, clutch pushrod and gear selector.
You need to remove the gear lever, outer sprocket cover, front drive sprocket and then the inner cover and then it just slots on the end of the shaft next to the selector mechanism.
Top
stubby
Regular Poster
Posts: 15
Joined: 1st Jul 2011
Location: east yorks , patrington

#3 PostAuthor: stubby » Fri Aug 16, 2013 12:03 pm

thanks for that rob
no not fitting an air shifter but building up a new motor from scratch and thought as i had one lying about would put it in as i rebuilt the transmission.
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#4 PostAuthor: Pigford » Fri Aug 16, 2013 12:20 pm

Another associated upgrade for older engines is a solid selector shaft - the one the "over-shift bush" fits on. The later engines actually have solid shafts :wink:
And on the 7th day... Zeds were created!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests