Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Gear lever return spring broken?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

Gear lever return spring broken?

#1 PostAuthor: Mark Tiller » Sat Jul 30, 2011 9:50 pm

Went out for a spin and the tacho cable broke as i set off....

and on the way home the gear lever stuck down when changing from 5-4...changed back up and it stayed there too, got home Ok and got it back to N by hand.
Any suggestions? is it a hard job to change it?
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 2319
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#2 PostAuthor: zed1015 » Sat Jul 30, 2011 10:40 pm

Easy enough job.
Sprocket cover off.
Sprocket off.
Then remove the cover that holds the seals and there it is.
Pop in a new spring, reassemble and away you go.
Will need a new gasket though if you are unlucky.
Should only take an hour max.
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

#3 PostAuthor: Mark Tiller » Sat Jul 30, 2011 10:46 pm

Cheers zed1015...l will whip the cover off in the morning and have a look
Top
User avatar
malc87
ZedHead
ZedHead
Posts: 1020
Joined: 8th Jul 2007
Location: manchester

#4 PostAuthor: malc87 » Sat Jul 30, 2011 10:58 pm

Did it on my Z1A with 42000 on the clock :(
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

#5 PostAuthor: Mark Tiller » Sat Jul 30, 2011 11:00 pm

malc87 wrote:Did it on my Z1A with 42000 on the clock :(


nearly 45000 so maybe was overdue?
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

#6 PostAuthor: Mark Tiller » Sun Jul 31, 2011 10:08 am

Removed gear lever linkage and swivelled it backwards....
took outer cover and sprocket off (was loose!) then removed inner cover and the spring is fine????...
It was then i noticed the Tarozzi gear pedal was still stuck in position...Doh
The knurled nut had worked loose and caused the lever to bind...
F**K!
Ah well new gasket from Zpower on the way...
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 13 guests