gpz1100 rear wheel you gotta read this !

[marve114]

hi guys i know i ask alot of questions but you guys are full of wisdom
to take my mind off the carbs for a while i decided to fit the geepers gpz1100 rear wheel into my j

any hows i knocked the tyre off the hidious bright yellow standard wheel went to fit it 120/90-18 and it fell straight over the gpz wheel

scratching my head for a few minutes

had a look around the wheel ive seen 17 3.00

is this a rare wheel i have got

what tyre will safely go on this rim being its only 3.00 wide and a 17"

let me know your veiws guys
im very intrested

[london calling]

Gpz1100 uni-trak runs a 3.00 x 17" rim,
GPz750 uni-trak & Turbo run a 3.00 x 18" rim.
Z1000 J1/J2 run a 2.15 x 18" rim
Z1000 J3/R2,Z1100R1 and GPz1100 B1/B2 run 2.50 x 18" rim

You'll be needing a 17" tyre for your 17" rim

[marve114]

what size tyre you think 130/80-17 ?


i may just get a gpz750 rear wheel and change the bearings (done this before)
as i can get a nice wheel for for less than £30.00

[london calling]

130/80 or 140/70.

[marve114]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

going to get this and run 18's for the summer

[steve.w]

marve ive got a pair of 750 uni wheels in red very good cond steve

[Ginger Bear]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200438766565&ssPageName=STRK:MEWAX:IT

going to get this and run 18's for the summer

Well, that was cheap enough....... Looks tidy too

[marve114]

thanks for the offer steve but ive got a front wheel and its already fitted like a glove
only need that rear that i bought of ebay to turn up and she is mobile again
thanks for all your feed back guys