Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

electrics

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
john b

electrics

#1 PostAuthor: john b » Sat Mar 14, 2009 11:43 am

can any one shed any light have rebuilt my z1b put new harness and all new switches every thing new but rectifier regulator starter solenoid when ignition turned on fuse just blows any one got any ideas doing my head at the moment
Top
Mick Hayward
100Club
100Club
Posts: 126
Joined: 2nd Jan 2009
Location: Grateley Hampshire

Electrics

#2 PostAuthor: Mick Hayward » Sat Mar 14, 2009 11:59 am

Hi John

Disconnect each part at a time to establish which bits and connections are cousing the problem. Something is going down to earth when you switch the ignition on.

Mick
Top
User avatar
Steve S
Custard Cream
Custard Cream
Posts: 598
Joined: 10th Nov 2006
Location: Surrey

#3 PostAuthor: Steve S » Sun Mar 15, 2009 12:18 pm

I agree,if you have had it all to bits you will just have to do disconnects and try again,something is obviously shorting out...........unfortunately you will probably go through a lot of fuses.Start with the easy bits like lights,indicators,horn etc and work your way through,check your switchgear isn,t shorting on the bars all your earths etc. good luck. :D
Top
john b

SORTED

#4 PostAuthor: john b » Thu Mar 19, 2009 9:26 pm

CHEERS STEVE AND MICK. WAS A LITTLE NICK IN WIRE IN IGNITION
Top
Mick Hayward
100Club
100Club
Posts: 126
Joined: 2nd Jan 2009
Location: Grateley Hampshire

electrics

#5 PostAuthor: Mick Hayward » Thu Mar 19, 2009 10:37 pm

Well done John glad you manages to sort it out.

Mick
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests