)
IN the past I have found that inserting the key often releases the barrel, but this one isn't keen to move
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Removing key barrel from petrol cap
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Removing key barrel from petrol cap
I have order a new cap for the Unitrak, but I notice that the new one doesn't come with a lock barrel. I want to move the one from the old one tinto the new one, but there are no clues in the manual (Genuine Workshop of course )
IN the past I have found that inserting the key often releases the barrel, but this one isn't keen to move
)
IN the past I have found that inserting the key often releases the barrel, but this one isn't keen to move
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
remove the catch from the underside of the cap 4 screws i think? then there is a small metal cover with an offset cam that you can remove with some pliers it just pulls out then you will see the bottom of the lock/ barrel. there is a spring loaded pawl at the bottom that you need to push to release the lock. also make sure you fit the key to aid removal
Who is online
Users browsing this forum: No registered users and 15 guests