Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Problem fitting new Tarozzi rearsets

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#16 PostAuthor: scott » Mon Feb 25, 2013 7:43 am

Fred ......i had to make a 5mm thick spacer to slide over that shaft.....it then gave me the correct return of the pedal
Top
User avatar
Fred the Zed
Custard Cream
Custard Cream
Posts: 735
Joined: 28th Nov 2012
Location: Sutton Coldfield

?

#17 PostAuthor: Fred the Zed » Mon Feb 25, 2013 6:03 pm

scott wrote:Fred ......i had to make a 5mm thick spacer to slide over that shaft.....it then gave me the correct return of the pedal


Hi Scott, Errrrmm, it strikes me that Mr Kawasaki might have put things together in a number of different ways then, as sliding a 5mm spacer over the pivot shaft would make the situation worse not better. I'm sure everyone's advice is right in their experience, with their particular machine but it appears that set ups vary from model to model or even within a model range.

I think I'm off down an engineering shop to get 6.5mm cut out the middle of my Tarozzi rocker arm and it welded up and plated again. :roll:

Thanks for your help though

Fred
Paid Up Member
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 28 guests