GPZ1100, Z1100R Exhaust Collets Wanted

[Magnum1]

I had a set, but can't find them and it's holding up the Harris rebuild. If anyone has a set to sell I would really appreciate it.
Cheers,
Rod

[steve.w]

big green buses mate makes em in stainless think theyre abot £30 for a set of 8

[Magnum1]

[quote="steve.w"]big green buses mate makes em in stainless think theyre abot £30 for a set of 8 [/quote

Cheers Steve, have you got a link?

[big green bus]

I will ask him if he can make some.

[big green bus]

Have you or can you get hold of one to measure as there are a few different lengths

[Al]

I have one of the standard ones i can measure but this may not help.

AL

[Magnum1]

Have you or can you get hold of one to measure as there are a few different lengths

Thanks for responding Steve - diameter is 38mm by 28mm deep.
Cheers,
Rod

[big green bus]

I have sent him a message and I will let you know as soon as I hear back. If he makes them he tends to make a few sets so I will post them on here if he does.

[Magnum1]

Cheers, I looked on Z Power, but they don't list them. I'll give them a call on Monday to see if they can get them.
Cheers,
Rod

[garyd]

I'd be interested in a set....I managed to give my only set away last year...Doh!

[big green bus]

He said £40 delivered for one set, but £30 a set if he gets six orders , he also said to measure the inside diameter of the clamp to be sure, he thinks the size is for the larger ones not the GPz/Z1000j type, Zorded could you confirm the length of your gpz ones please as he will not take them back if the measurements are wrong.

[Al]

I've got two piece ones at 38mm by 28mm deep for the J1 with J head same as Unitrak head which it has now. These are fitted to a set of Laser headers.
The Laser headers are a very tight fit in the exhaust port counter-bore!!
These are the ones with the one piece cast alloy clamp.

I also have some one piece ones from a Marshall which is a J fitment Stamped Z1000 J which are 37mm minor diameter and 30mm deep. These have a major diameter of 48mm. The Marshall headers are noticeably smaller in diameter than the Laser ones fitted at this time.
The diameter of the Marshall headers is 33mm.
These have a steel plate for a clamp rather than the above

Hope this helps.

AL

[z1bman]

standard ones part no 92027-1300 cradley have them in stock

[big green bus]

standard ones part no 92027-1300 cradley have them in stock

Kawasaki Part Number Displayed: 920271300
Kawasaki Part Description: COLLAR,EXHAUST PIPE
Kawasaki Part UK(£) Price: £2.75

Not too expensive for the standard ones, it is up to you if you go for them or the stainless steel.
(is anybody who has had the S/S ones had any problems with them ?)

[Magnum1]

standard ones part no 92027-1300 cradley have them in stock

Kawasaki Part Number Displayed: 920271300
Kawasaki Part Description: COLLAR,EXHAUST PIPE
Kawasaki Part UK(£) Price: £2.75

Not too expensive for the standard ones, it is up to you if you go for them or the stainless steel.
(is anybody who has had the S/S ones had any problems with them ?)

I might as well go for the Kawasaki ones, never bothered to phone them because I thought they would be extortionate, but 2.75 is not too bad if that's for 1 set. I'll give em a call and check.
Cheers,
Rod