Can anyone loan me the above valve clearance tool for the J/R/GPz range.
The club only has the tool 57001-109 for the round shape head and I will need to adjust the valve clearances on my ELR rep next week after it's bed in/settled down.
I will make a new tool using the loaned one as a template and post a fully detailed drawing on the forum like I did for the early type.
I donated about 50 shims to the club a couple of years ago.
Many thanks, Will
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Borrow only - J/R/GPz valve clearance (shim) tool 57001-113
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Borrow only - J/R/GPz valve clearance (shim) tool 57001-113
Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
OK let me clarify.
It is a standard J/R/GPz head with shim on top.
I already have the factory tool for the Z1/A/B/900/1000A1/2. This will not fit around the outside of the cyl head so I cant hold the folllower.
Obviously there must be some difference otherwise Kawasaki wouldn't quote a different tool would they
It is a standard J/R/GPz head with shim on top.
I already have the factory tool for the Z1/A/B/900/1000A1/2. This will not fit around the outside of the cyl head so I cant hold the folllower.
Obviously there must be some difference otherwise Kawasaki wouldn't quote a different tool would they

Kawasaki H2C 750, ZRX1100R, H**** VF1000RG Rothmans, H**** VF500F2F, Suzuki GSXR750F Slabbie
Who is online
Users browsing this forum: No registered users and 7 guests