v&h baffle

Redbeard · #1 PostAuthor: **Redbeard** » Fri Oct 25, 2013 10:23 pm

Has anyone got a baffle for a v&h drag pipe knocking around? could do with a badge too. or could i make one (baffle), they are more expensive new than the exhaust new? thanks.

london calling · #2 PostAuthor: **london calling** » Sat Oct 26, 2013 2:33 pm

The sidewinder drag pipe mega doesn't have a baffle.
http://www.ebay.co.uk/itm/131022738785? ... 1555.l2649

Redbeard · #3 PostAuthor: **Redbeard** » Sat Oct 26, 2013 3:27 pm

I think that's different to mine, I will have a look and post a pic. I had one on my st with a baffle, and the seller sold it saying the baffle was missing. it'll be a bit loud then. the marshall I have has to be removed every time the filter is changed.

marlin · #4 PostAuthor: **marlin** » Sat Oct 26, 2013 9:15 pm

sidewinder with a baffle ? cheers martin

Redbeard · #5 PostAuthor: **Redbeard** » Sat Oct 26, 2013 9:36 pm

maybe i got the identity wrong. will check tomorrow and get a pic up on here.

AndyZ1R · #6 PostAuthor: **AndyZ1R** » Sat Oct 26, 2013 10:49 pm

Hello Adam,

I used the baffle from my standard V & H street pipe on my Pro-pipe, and is ideal for road use. So if you can find one of those that will fit fine. If you can`t get one, let me know, and I could get you dimensions if you want to try and get a copy made. Or if you are in the area, you are welcome to borrow it if you like.

Redbeard · #7 PostAuthor: **Redbeard** » Sun Oct 27, 2013 9:37 am

AndyZ1R wrote:Hello Adam,

I used the baffle from my standard V & H street pipe on my Pro-pipe, and is ideal for road use. So if you can find one of those that will fit fine. If you can`t get one, let me know, and I could get you dimensions if you want to try and get a copy made. Or if you are in the area, you are welcome to borrow it if you like.

Hi Andy, thanks for the help. I may have sourced one for now. I hope to get a photo of it later which may help to identify it. Cheers again.

AndyZ1R · #8 PostAuthor: **AndyZ1R** » Sun Oct 27, 2013 10:27 am

Redbeard wrote:
AndyZ1R wrote:Hello Adam,

I used the baffle from my standard V & H street pipe on my Pro-pipe, and is ideal for road use. So if you can find one of those that will fit fine. If you can`t get one, let me know, and I could get you dimensions if you want to try and get a copy made. Or if you are in the area, you are welcome to borrow it if you like.

Hi Andy, thanks for the help. I may have sourced one for now. I hope to get a photo of it later which may help to identify it. Cheers again.

No problem Adam, let me know if that one doesn`t work out. Put the pic on here if you can and I`ll compare it if you like?

Redbeard · #9 PostAuthor: **Redbeard** » Sun Oct 27, 2013 5:54 pm

will do andy, hopefully I can get a pic taken tomorrow when I get in if my garage is still standing..

Redbeard · #10 PostAuthor: **Redbeard** » Mon Oct 28, 2013 5:14 pm

Took some photos of the exhaust. Couldn't see any identity markings. The hole in the end suggests it had a baffle at some point, possibly a non-factory one.

AndyZ1R · #11 PostAuthor: **AndyZ1R** » Tue Oct 29, 2013 11:36 pm

Hello Adam,

That looks the same as my pipe, the V & H pro pipe (sidewinder) came with that hole in the end to enable you to fit a standard baffle in it, which is what I did. So if you can get a standard street pipe baffle then that will be fine.

Regards,

Andy

Redbeard · #12 PostAuthor: **Redbeard** » Wed Oct 30, 2013 5:50 pm

nice one andy, i shall keep em peeled for a baffle. cheers again!

v&h baffle

v&h baffle

Who is online