Anyone got a Mikuni Needle jet - 258 O-1
was Kawasaki Part no. 16017-1011
Needs to be in good condition with no wear / pitting of the internal bore.
Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Mikuni Needle Jet - for UK spec Z1000 MKII
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Hi Geoff,
That's the emulsion tube.
The needle jet is sat above that & is a press fit in the carb body.
When you remove the slide & look down into the carb the needle jet is the brass bit that the needle goes down through.
You tap it from the slide side & it drops out at the bottom of the carb from where you removed the emulsion tube from.
Hopefully the no. on it will be 258 O-1
Cheers,
Nick.
That's the emulsion tube.
The needle jet is sat above that & is a press fit in the carb body.
When you remove the slide & look down into the carb the needle jet is the brass bit that the needle goes down through.
You tap it from the slide side & it drops out at the bottom of the carb from where you removed the emulsion tube from.
Hopefully the no. on it will be 258 O-1
Cheers,
Nick.
Who is online
Users browsing this forum: No registered users and 8 guests