Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

caliper question.

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

caliper question.

#1 PostAuthor: mick znone » Tue Apr 28, 2009 4:43 pm

i do feel as though i am all questions at the moment, but its a learning curve guys.
Ive put the front caliper on and bleed the system, brakes OK [for a z]. my question= the shaft bolts [allen key heads] do you tighten them right up and close the caliper? having heard on a recent post of someones brake slamming on because of the fluid heating up from the hot disc, i thought i would check. [ the manuals say nothing]
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#2 PostAuthor: wilsonsjw11 » Tue Apr 28, 2009 5:23 pm

Mick
The 2 bolts in question are to be torqued up,25 ft lbs I think but check your manual,prior to assembling the caliper lightly coat these 2 bolts with copper slip grease in between where the 2 rubber boots go on each shaft,the caliper is meant to "float",the grease will aid it.
Regards
Steve
Top
GEZ635
100Club
100Club
Posts: 396
Joined: 12th Mar 2002
Location: BIRMINGHAM

hi

#3 PostAuthor: GEZ635 » Tue Apr 28, 2009 5:24 pm

They should be tightened up Mick.Make sure the carrier bracket moves back and forward on the allen bolts shafts(there will some resistance) and you should be good to go.
Gez
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#4 PostAuthor: mick znone » Tue Apr 28, 2009 5:28 pm

thats good for me guys, i held back on the throttle today, just in case, will give it some welly tomorrow :D
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 21 guests