Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

1973 Carburettor adjustment???

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
toycollector10
100Club
100Club
Posts: 401
Joined: 10th Dec 2007
Location: New Zealand

1973 Carburettor adjustment???

#1 PostAuthor: toycollector10 » Fri Nov 14, 2008 9:41 am

I have a 1973 Z1 engine number 16xxx. It has the early 28 mm carbies.

Rebuilt with Keyster kits. Has been run with the correct 5J9 jet needles (courtesy of Pigford, thanks mate), and the Keyster jet needles as well. NOS emulsifier tubes as included.

Needles are set at the middle setting.

The bike bogs when the throttle is opened.

Slow to warm up on the choke.

I'm thinking pilot jet size or air screw setting.

Help???
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Fri Nov 14, 2008 7:26 pm

They do run rather lean on initial throttle opening..........
Could trys a set of 20 pilots (assuming they are 17.5)..... or raise needle a slot :|
And on the 7th day... Zeds were created!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 20 guests