Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

The right black for alloy wheels

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
LTD Project
100Club
100Club
Posts: 224
Joined: 31st Aug 2008
Location: York, North Yorkshire

The right black for alloy wheels

#1 PostAuthor: LTD Project » Mon Nov 10, 2008 8:32 pm

Can someone let me know what the right black is for the alloy wheels on my Z1000. I know know it is black but is it gloss, semi-gloss, satin, matt......

Any one got any good products to recommend for this re-paint.....
Help and motivation always required......
KZ1000 B4 on the road, KZ1000 B4 under serious restoration, KZ1000 B3 waiting it's turn.
GB's old snotter in the operating theatre at present!
Top
LTD Project
100Club
100Club
Posts: 224
Joined: 31st Aug 2008
Location: York, North Yorkshire

#2 PostAuthor: LTD Project » Tue Nov 11, 2008 4:36 pm

I can't be the first person to be tarting up me alloys.....

What products have people used, any good / long lasting results, any poor products,

Paint brush, spray can, stove enamel?

Trying to avoid re-inventing the painting of the wheel..... :roll:
Help and motivation always required......

KZ1000 B4 on the road, KZ1000 B4 under serious restoration, KZ1000 B3 waiting it's turn.

GB's old snotter in the operating theatre at present!
Top
User avatar
steve bowdler
Area Rep.
Area Rep.
Posts: 1793
Joined: 20th Apr 2005
Location: swansea s.wales

#3 PostAuthor: steve bowdler » Tue Nov 11, 2008 4:44 pm

well I just used smooth hammerite gloss , looks fine, again depends on what standard your looking at rebuilding your zed
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2907
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

black

#4 PostAuthor: ted1r » Tue Nov 11, 2008 5:47 pm

HI MATE HOWS IT GOING? FROM THE SHOWROOM THE FINISH IS A SLIGHT SATIN BUT ITS HOW PC YOU WANT IT ,I USE MATT BLACK ON MY Z1R AND I FIND AFTER A FEW POLISHES WITH MR SHEEN YOU GET THE SAME EFFECT.

HOPE THATS OF SOME HELP

REGARDS TED
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#5 PostAuthor: london calling » Tue Nov 11, 2008 10:37 pm

Powder coating would be much more durable.
I've used plasti-kote paint with good results :wink:
Jack
Top
LTD Project
100Club
100Club
Posts: 224
Joined: 31st Aug 2008
Location: York, North Yorkshire

#6 PostAuthor: LTD Project » Wed Nov 12, 2008 7:25 pm

Thanks for all your responses, I think I might take a punt with the Plastikote....

Does it clean easy? Esp. on the rear wheel.

Thanks again all
Help and motivation always required......

KZ1000 B4 on the road, KZ1000 B4 under serious restoration, KZ1000 B3 waiting it's turn.

GB's old snotter in the operating theatre at present!
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 3407
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#7 PostAuthor: RALPHARAMA » Wed Nov 12, 2008 11:44 pm

I used Hammerite satin aerosol with good effect. Masking up took hours :(
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Top
Keefleaf
Hardcore
Hardcore
Posts: 1669
Joined: 24th May 2007
Location: Isle of Wight

#8 PostAuthor: Keefleaf » Thu Nov 13, 2008 12:41 am

How about PJ1 satin,engine black.
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 3992
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#9 PostAuthor: london calling » Thu Nov 13, 2008 4:43 am

Check out Wilko's for good prices on plasti-kote.
They also have their own brand paint at an even lower price.
Jack
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests