Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Dymag sprocket spacer/cush drive

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Coose
100Club
100Club
Posts: 344
Joined: 20th Apr 2015
Location: North Yorks

Dymag sprocket spacer/cush drive

#1 PostAuthor: Coose » Sun Oct 23, 2016 7:17 am

Morning all,

This is a bit of a long shot, but would anyone happen to have either the spacer or a cush drive that fits between an old Dymag rear wheel and sprocket? It had 5no. 10mm holes on a 90mm pcd, a 75mm bore and is 15mm wide.

Cheers,
Coose :)
Top
martinz1000r
Custard Cream
Custard Cream
Posts: 955
Joined: 1st Jul 2007
Location: Oxfordshire

#2 PostAuthor: martinz1000r » Sun Oct 23, 2016 9:44 am

Try TPCS. Steve may have spares.

http://tpcs-magnesium-refurbs.co.uk/
Z1000R, Moto Martin, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, Yamaha YZF750SP, SP1 Hoonda, Katana 1100, Bimota SB6R
Top
Coose
100Club
100Club
Posts: 344
Joined: 20th Apr 2015
Location: North Yorks

#3 PostAuthor: Coose » Tue Oct 25, 2016 2:46 pm

Cheers. I tried Steve and he was extremely helpful in advising that the wheel is from a TZ500 and thus never had a cush drive as the TZ has one in the clutch. It looks like I'll have to get one made as mine is a 5-bolt fixing and a Dymag one (if you can find one) is 6-bolt on a PCD of 100mm...
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 7 guests