Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000 MK2 parts

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
whyte25
Regular Poster
Posts: 27
Joined: 3rd Sep 2015
Location: Farnborough

Z1000 MK2 parts

#1 PostAuthor: whyte25 » Fri Sep 04, 2015 9:40 pm

Hi all

I'm on the lookout for a Z1000 MK2 frame with tank / panels / seat & V5.

Does anyone have anything knocking about, or can point me in the right direction

Rgds
Last edited by whyte25 on Sat Sep 05, 2015 7:18 am, edited 1 time in total.
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#2 PostAuthor: mick znone » Sat Sep 05, 2015 6:20 am

you would be best off putting mk2 parts or even the parts themselves in the title mate, you may miss someone with these items because it looks like you want a whole mk2 in the title.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
whyte25
Regular Poster
Posts: 27
Joined: 3rd Sep 2015
Location: Farnborough

#3 PostAuthor: whyte25 » Sat Sep 05, 2015 7:11 am

Ohhhh good shout.

Cheers
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#4 PostAuthor: mick znone » Sat Sep 05, 2015 7:23 am

all the best with the search, a real nice model is the mk2.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#5 PostAuthor: paul doran » Sat Sep 05, 2015 2:11 pm

I have a full set of bodywork for a mk2
way too many Zeds
Top
whyte25
Regular Poster
Posts: 27
Joined: 3rd Sep 2015
Location: Farnborough

#6 PostAuthor: whyte25 » Sat Sep 05, 2015 10:10 pm

paul doran wrote:I have a full set of bodywork for a mk2


Hi

How much are you after for them ? Have you got any pics?

Ta.
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#7 PostAuthor: paul doran » Sun Sep 06, 2015 6:57 am

I will put some up later today
way too many Zeds
Top
neilbarrett
Hardcore
Hardcore
Posts: 1353
Joined: 25th Feb 2008

#8 PostAuthor: neilbarrett » Sun Sep 06, 2015 7:21 am

you can buy aftermarket tail pieces ,side panels and seat from z power ,also possibly the tank as well

if you get stuck ,try webike also
Top
User avatar
Redbeard
Hardcore
Hardcore
Posts: 1264
Joined: 7th Feb 2009
Location: Aylesbury, Buckinghamshire

#9 PostAuthor: Redbeard » Sun Sep 06, 2015 7:39 am

Tail units come up on ebay (far cheaper than pattern one), I sold one recently to someone in Japan for about £30. ST ones are usually cheaper but they are slightly different, they have a recess part where the seat goes (so hidden with seat down) but they fit and are identical otherwise. Maybe not an issue if you are building a special? There are MK2 side panels at £33 each on ebay as well now. Good luck with your project, the MK2 is my fave of all. Let me know if you are stuck with a tank, I might be tempted to sell mine. Might. :wink:
1979 Z1000ST
Top
User avatar
nicomkii
100Club
100Club
Posts: 316
Joined: 15th Nov 2014
Location: Perth Western Australia

#10 PostAuthor: nicomkii » Sun Sep 06, 2015 7:42 am

Doremi sets on Fleabay now for aroun $1800 US in either the Luminous Blue or Luminous Red. They are good quality but glad I got mine when the $ was at parity and price was sub $1k
Top
whyte25
Regular Poster
Posts: 27
Joined: 3rd Sep 2015
Location: Farnborough

#11 PostAuthor: whyte25 » Sun Sep 06, 2015 11:00 am

Redbeard wrote:Tail units come up on ebay (far cheaper than pattern one), I sold one recently to someone in Japan for about £30. ST ones are usually cheaper but they are slightly different, they have a recess part where the seat goes (so hidden with seat down) but they fit and are identical otherwise. Maybe not an issue if you are building a special? There are MK2 side panels at £33 each on ebay as well now. Good luck with your project, the MK2 is my fave of all. Let me know if you are stuck with a tank, I might be tempted to sell mine. Might. :wink:



Thanks for that, I wasn't aware of the similarities. I've checked out the Z Power ones - they are a contender. If I get stuck I shall of course put a shout out on here.
Top
whyte25
Regular Poster
Posts: 27
Joined: 3rd Sep 2015
Location: Farnborough

#12 PostAuthor: whyte25 » Sun Sep 06, 2015 11:04 am

paul doran wrote:I will put some up later today


Cheers, I see you're in / Nr Dublin? My mum & dad live in Dublin so we could sort something out locally.
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#13 PostAuthor: paul doran » Sun Sep 06, 2015 9:17 pm

I have pictures of the tank and tailpiece but I cannot find the side panels but I do have them
way too many Zeds
Top
whyte25
Regular Poster
Posts: 27
Joined: 3rd Sep 2015
Location: Farnborough

#14 PostAuthor: whyte25 » Sun Sep 06, 2015 10:28 pm

Ok cool. If you could send them over when you get a chance it will be much appreciated
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 15910
Joined: 24th Sep 2004
Location: near Dublin Ireland

#15 PostAuthor: paul doran » Mon Sep 07, 2015 9:58 pm

I will post pictures tomorrow night sorry just too much on to do it today
way too many Zeds
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 10 guests