Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

carb balancing

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
knut
100Club
100Club
Posts: 427
Joined: 24th Jun 2007
Location: cork,Ireland

carb balancing

#1 PostAuthor: knut » Mon Jan 21, 2008 8:27 pm

hi guys ,looking for some help adjusting slides on my kz900 (26mm).i was using a piece of cooper wire approx 1.5 mm under the slides as a gauge but i,m unsure of the correct procedure with the lock nut and screw and the second nut next to it,cos the slide gap keeps changing when i do the next carb.i know i,ll be kicking my self it,s probably that easy :!: my haynes manual doesn,t cover these carbs (3 screws on cover).
any help much appreciated guys
what,s there to say except we,re all mad on here.
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#2 PostAuthor: chrisu » Mon Jan 21, 2008 8:33 pm

you really only want to use the wire trick as a starter to get them approx right. You really need to use vacuum gauges or similar to balance them properly.

I've got a Morgan Carbtune (made in NI) and its a doddle to use.
Top
User avatar
uk kev
Hardcore
Hardcore
Posts: 1531
Joined: 13th Aug 2006
Location: Berkshire

#3 PostAuthor: uk kev » Mon Jan 21, 2008 8:37 pm

Image


Image
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 23 guests