Looking to get frame and various other cycle parts off to the power coaters next week and would appreciate some advice on the various paint finishes used.
With the various black finishes available, Flat Black, Satin Black, Semi-Gloss Black, Gloss Black etc (assuming the powder coater has them) what are the correct (or considered to be the best) finishes for the following parts.
1. Frame, swinging arm, battery box and all the other various brackets.
2. Headlamp shell
3. Top yoke and handlebar clamps
4. Bottom yoke
5. Calipers
6. Front wheel hub
7. Mirror stems
8. Seat base
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
What black paint finishes?
Moderators: KeithZ1R, chrisu, paul doran, Taffus
1. Frame, swinging arm, battery box and all the other various brackets. = gloss black
2. Headlamp shell = satin black
3. Top yoke and handlebar clamps = satin black
4. Bottom yoke = gloss black
5. Calipers = satin black
6. Front wheel hub = satin black
7. Mirror stems = satin black
8. Seat base = gloss black
2. Headlamp shell = satin black
3. Top yoke and handlebar clamps = satin black
4. Bottom yoke = gloss black
5. Calipers = satin black
6. Front wheel hub = satin black
7. Mirror stems = satin black
8. Seat base = gloss black
Who is online
Users browsing this forum: No registered users and 16 guests