Guys
I have just cleaned up my seat and there are 3 irritating threaded studs with nuts and washers at the front. you all have probably seen similar.
What are they for and can i cut them off!
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Seat
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Plate is probably the wrong description.
They are a sheet of metal about 20gauge thick and about 1/2 " wide and 4 to 6'' long. They can be made by sniping "vee's" about 3/4 "apart along the sheet and bending outwards to form a point. Once thru the leatherette they are bent back.
The strips would have to be spot welded back (if still required).
The bolts /screws can be removed.
Some seats have these vee's pressed out of the seat base around the periphery.
RegardZ.
They are a sheet of metal about 20gauge thick and about 1/2 " wide and 4 to 6'' long. They can be made by sniping "vee's" about 3/4 "apart along the sheet and bending outwards to form a point. Once thru the leatherette they are bent back.
The strips would have to be spot welded back (if still required).
The bolts /screws can be removed.
Some seats have these vee's pressed out of the seat base around the periphery.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Who is online
Users browsing this forum: No registered users and 18 guests