Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Torque settings

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Muddychris
100Club
100Club
Posts: 171
Joined: 14th Aug 2007
Location: Norwich

Torque settings

#1 PostAuthor: Muddychris » Thu Sep 20, 2007 4:27 pm

I'm about to torqe the head down on the eddie lawson. Bolts 13 and 14 are 10mm bolts on the out side of the block. Are these torqued down to the same settings as the rest of the head bolts?

I've torqued everything down to 18 the next step is 29 which seems a little over the top for a 10mm bolt and i dont realy want one to snap off

Regards

Chris
Experience is something you don't get until just after you need it.
Top
User avatar
000zeds
ZedHead
ZedHead
Posts: 1129
Joined: 30th Dec 2005
Location: Kent

#2 PostAuthor: 000zeds » Thu Sep 20, 2007 4:46 pm

Muddychris , The two outer bolts 6mm thread 10mm head on Z1s are torqued to 104 ins-lb {1.2 Kg-M} and Cylinder head nuts are 25 ft-lb {3.5 Kg-M}. Hope that is some help.
Zeds-R-Us
Top
Ed Z1-R
Hardcore
Hardcore
Posts: 2347
Joined: 14th Oct 2005

#3 PostAuthor: Ed Z1-R » Thu Sep 20, 2007 8:00 pm

in lbs x .0833 = ft-lbs


104 x .0833 =


8.6 ft-lbs
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests