Z1000 master cylinder reservoir removal......

[gordon62]

H i All,
I wish to remove the plastic reservoir part of both front and rear master cylinders, on my GS1000, they have 2 screws in bottom and then they come off, albeit bit of pressure, how do they come off on the Z1000, I dont see any screws,
cheers

[z1bman]

the round type are screwed in

[gordon62]

the round type are screwed in

Do you mean the plastic part screw"s in, or held in with metal screws...

[scott]

There is normally a plastic insert that sits on top of those screws.....just use a bent piece of metal, kind of hook shaped will do and then just prise/pull up the plastic insert to reveal the screws.

[gordon62]

rear one done......

just gotta do the front one, the round insert seem not to wanna come out, but will try hooking it out....
cheers Guys.......