
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
South West Rally 2009 31st July - 2nd August
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
- Regular Poster
- Posts: 74
- Joined: 27th Jul 2007
- Location: Saltash,cornwall
hi ralph, and gang im going to come up to the rally but only for the saturday, and i wont be able to camp as have too many other committements that weekend been off the radar for a while as had to attend my best mates wedding in vegas last month and had to do lots of weekend trips back up to london.as well as other club committements (you know what its like) what time are you planning to do the rideout? i would like to get up for that if poss? im working till 12 but should be able to get to the venue by 2 ish, is this too late? hope not as it would be good to catch up. cheers




- RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
mikey wrote:Pigford wrote:Sounds a bit complicated..... Hows Mikey taking itHow about a bit of string
Fcuked if i can work out what hes going on about,
Think its best im tail end charlie
It's actually pretty much fool proof and far more simple than it soundz.
Mikey - the Tail End Charlie is a pretty important post ... the last person we need in that position is someone who can't find his way out of the freezer department in Asda

Joking aside it's a piece of urine - the one following me just stops at a junction and points the way I went and then joins the back when he sees the tail End Charlie - what could be easier

Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
- RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Ride out time ?
I had initially planned it for 11.00am, but I guess it could be put off for a bit?
The idea of starting the rally on the Friday was so that we could all have a few beers on the Friday night and have a leisurely Saturday morning ready to enjoy the ride out
When we go to the Yorx rally I always take the scenic route and take it easy riding up on Friday so I am ready to enjoy the ride out on the Saturday ... all relaxed ... well as relaxed as you can be after 270 odd miles on 1970's suspension
I can't wait now .... it's all in place ... I've even put me two:four seat back on the Old Gurl for maximum pose
Though I think Jak will out pose us all on his Café Racer 
I had initially planned it for 11.00am, but I guess it could be put off for a bit?
The idea of starting the rally on the Friday was so that we could all have a few beers on the Friday night and have a leisurely Saturday morning ready to enjoy the ride out


I can't wait now .... it's all in place ... I've even put me two:four seat back on the Old Gurl for maximum pose


Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
-
- Regular Poster
- Posts: 74
- Joined: 27th Jul 2007
- Location: Saltash,cornwall
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
- RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
OK ladz - I'll set a provisional time of 1.00pm for the ride out, but it can be a bit flexible if necessary.
I don't want to leave it too late as we've got to cover sixty odd miles of not very fast roads, with a least one stop though I have it in mind to maybe stop for a cuppa in Cheddar.
I don't want to leave it too late as we've got to cover sixty odd miles of not very fast roads, with a least one stop though I have it in mind to maybe stop for a cuppa in Cheddar.
Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
- steve bowdler
- Area Rep.
- Posts: 1793
- Joined: 20th Apr 2005
- Location: swansea s.wales
- RALPHARAMA
- Area Rep.
- Posts: 3407
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
I shall be getting there at lunchtime
Looking forward to it already 


Ralph Ferrand
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
Z1000A1 (1977), Z1300A5 (1983), Z900A4 (1976) GPZ1100 Unitrak (1983)(project), RD250B (1975)(project), ZRX1200R (2005) DT175MX (1981) YZF R6 (1999)
http://www.bikerstoolbox.co.uk
- Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Who is online
Users browsing this forum: No registered users and 9 guests