Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

compression deppression

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
kwaka
Regular Poster
Posts: 68
Joined: 31st Jul 2007

compression deppression

#1 PostAuthor: kwaka » Sun Jun 01, 2008 9:29 am

Hi fellas, after rebuilding the motor on the Z1B we noticed a bit of smoke out the exhaust on a recent run. The bike has only 200 miles on the engine, it had the heads recond. new rings, but the bore was only honed. I did a compression test and got a reading of only 90 PSI per cylinder, squirt of oil made no difference. The local mech. says it still needs time to bed in. What do you think??
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#2 PostAuthor: Pigford » Sun Jun 01, 2008 10:12 am

Just rebuilt mine, and it does smoke a tad first 30 seconds.....
Don't panic until its done a few 100 miles.... unless it gets worse & worse :shock:
Give it time to bed in and hopefully it'll be OK.
And on the 7th day... Zeds were created!
Top
Hack
100Club
100Club
Posts: 123
Joined: 18th May 2005
Location: South Staffordshire

#3 PostAuthor: Hack » Sun Jun 01, 2008 10:46 am

Did you remember to hold the throttle fully open when carrying out the compression test?

Scared myself with that one on more than one occassion!
Top
kwaka
Regular Poster
Posts: 68
Joined: 31st Jul 2007

#4 PostAuthor: kwaka » Sun Jun 01, 2008 12:39 pm

errr thanks hack, i'll try a second time :oops: . That's why i love this forum :D
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#5 PostAuthor: chrisu » Sun Jun 01, 2008 1:09 pm

warm engine as well..................
Top
kwaka
Regular Poster
Posts: 68
Joined: 31st Jul 2007

#6 PostAuthor: kwaka » Mon Jun 02, 2008 9:27 am

All's well, 1&4 150 PSI, 2&3 140 PSI.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 21 guests