Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Pilot Screw Settings - Z1000-A2

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Nagahara
Posts: 3
Joined: 12th Aug 2009
Location: Stafford

Pilot Screw Settings - Z1000-A2

#1 PostAuthor: Nagahara » Tue Sep 01, 2015 5:05 pm

Hi there, have been restoring a Z1000-A2 US model and dont have much info on carb settings. Could anybody advise me on the number of screw out turns on the pilot screw. Have done the Z1 setting of 1.5 but runs poor better at 2

Thanks for your help

Nagahara
Top
User avatar
scott
Junior Section leader
Posts: 1217
Joined: 19th Sep 2007
Location: PORTSMOUTH

#2 PostAuthor: scott » Wed Sep 02, 2015 6:57 am

Mine are set to 1.5 turns except one is .5 turn out due to a slightly enlarged hole
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 14 guests