Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Tacho drive seals

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
phil1r
100Club
100Club
Posts: 142
Joined: 6th Aug 2009
Location: Cannock

Tacho drive seals

#1 PostAuthor: phil1r » Fri Jun 05, 2015 9:30 pm

Hi Guy's, can you change the inner seal in this unit :?: outer O ring no problem but pissing oil from the centre seal. Is this available as a kit or whole assembly, anyone got info on this and where from. :??
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#2 PostAuthor: z1bman » Fri Jun 05, 2015 9:51 pm

genuine seal still available cradley have it in stock £5.40
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:
Contact pertonpc

#3 PostAuthor: pertonpc » Fri Jun 05, 2015 9:59 pm

Hi Phil,
Take a look on these pics. You can see the inner and outer seal and the part number you need.
Think it is picture 16 as you scroll down
From Mark
http://www.zedrider.co.uk/z1-b.html
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
phil1r
100Club
100Club
Posts: 142
Joined: 6th Aug 2009
Location: Cannock

#4 PostAuthor: phil1r » Fri Jun 05, 2015 10:09 pm

z1bman wrote:genuine seal still available cradley have it in stock £5.40

Nice :) I'll be over to get one. Many thanks
Top
phil1r
100Club
100Club
Posts: 142
Joined: 6th Aug 2009
Location: Cannock

#5 PostAuthor: phil1r » Fri Jun 05, 2015 10:11 pm

pertonpc wrote:Hi Phil,
Take a look on these pics. You can see the inner and outer seal and the part number you need.
Think it is picture 16 as you scroll down
From Mark
http://www.zedrider.co.uk/z1-b.html
This should be the same for a Z1R I would think :?:
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Fri Jun 05, 2015 10:14 pm

you need to inspect the tacho gear shaft & make sure it is not worn where the seal grips the shaft. also fit a z650 fibre washer between the cable & the threaded part of the tacho drive
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 19 guests