Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

wont ffin start

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
keith mayall
100Club
100Club
Posts: 151
Joined: 1st Jun 2014
Location: MANCHESTER

#16 PostAuthor: keith mayall » Thu Mar 12, 2015 12:40 pm

Thanks everyone...the new coils where doing nothing.put the old ones on .it runs sweet as a nut.happy now.
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#17 PostAuthor: PAULJAC47 » Thu Mar 12, 2015 5:38 pm

Thought it was sparking?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#18 PostAuthor: z1bman » Thu Mar 12, 2015 5:56 pm

don't leave the ignition switched on for long periods
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#19 PostAuthor: Pigford » Thu Mar 12, 2015 5:58 pm

z1bman wrote:don't leave the ignition switched on for long periods



So how do you ride anywhere decent :cheek


I've seen a few sets of old coils melted due to ignition left on when the bikes been stopped by the kill switch and rider gets distracted :??
And on the 7th day... Zeds were created!
Top
RAYZ1
Custard Cream
Custard Cream
Posts: 863
Joined: 31st Jul 2008
Location: ABERDEEN

Re: wont ffin start

#20 PostAuthor: RAYZ1 » Thu Mar 12, 2015 6:24 pm

keith mayall wrote:had the carbs cleaned,refurbed.get a spark when contact the points with a driver..seems no fuel as the plugs aint wet...where do I start.getting nothing.
if theres anyone in the north Manchester area willing to check it out would be good.


do you get regular sparks at the plugs when you crank it over on the starter ? if not check you have rubbed off enough of the powder coating to get a good circuiy with the coils, also measure the resistance of the coil through the plug to earth - I think it should be around 5ohm ??, possibly 3 but I stand to be put right as its from memory, check all 12v connections .
Top
keith mayall
100Club
100Club
Posts: 151
Joined: 1st Jun 2014
Location: MANCHESTER

#21 PostAuthor: keith mayall » Thu Mar 12, 2015 7:04 pm

PAULJAC47 wrote:Thought it was sparking?
it did a weak one now and then but if I stuck a driver on the points it sparked...I put the old coil back on and the spark was mega...so I put em back on.works fine now.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 17 guests