Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Fork Cover

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
nicomkii
100Club
100Club
Posts: 316
Joined: 15th Nov 2014
Location: Perth Western Australia

Fork Cover

#1 PostAuthor: nicomkii » Tue Jan 20, 2015 6:06 am

When I got the MkII it had those cheap aftermarket Fork Ears for the Headlight on it. Attempting to bring it back to standard and somwhere along the line I picked up some repro Fprk Covers ( Part No. 44064-025)
Went to slip them on last night and oops too tight. Obviously not of the original pattern but what I need so I don't butcher these ones is the original measurement.
What I have now is -
Rough measuring
Image

Around 110mm
Image

They even look wrong, never took them out of the box they went straight into the cupboard

Image

Internal appears right.
Image


So just need to know how much to trim from the inside part so not as obvious. Going to be fun trimming them !!!
Top
jphaynes669
Hardcore
Hardcore
Posts: 1435
Joined: 24th Jun 2012
Location: Northants

#2 PostAuthor: jphaynes669 » Tue Jan 20, 2015 6:50 am

Hi Nicomkii, it could be tricky triming out the inner edge and it could end up very sharp, what about cutting small verticle slits in the inner edge . This might make it less rigid and give it a spring loaded effect when sliding onto the leg, :|
Jeff.H
Top
User avatar
Z1RII
100Club
100Club
Posts: 307
Joined: 20th Jul 2007
Location: Germany

#3 PostAuthor: Z1RII » Tue Jan 20, 2015 3:52 pm

the fork cover looks like a Z1 part, they are different to z1000/MKII

regards
amir
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#4 PostAuthor: z1bman » Tue Jan 20, 2015 5:12 pm

z1000 a3/a3a are the same as the z1/ z1000 but the z100a4 is different
Top
User avatar
nicomkii
100Club
100Club
Posts: 316
Joined: 15th Nov 2014
Location: Perth Western Australia

#5 PostAuthor: nicomkii » Wed Jan 21, 2015 1:00 pm

z1bman wrote:z1000 a3/a3a are the same as the z1/ z1000 but the z100a4 is different


And the difference is :?:
They were sold to me as MkII but they may possibly be the later A4. No point butchering them if they are, best I just keep an eye out for A3 ones :)
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Wed Jan 21, 2015 2:04 pm

no 20-1 in the parts diagram diagram is what is listed for the a4 but it looks like it just sits under the headlamp ear & is not as deep as the one you have


http://www.cmsnl.com/kawasaki-1979-kz10 ... ml#results


there are some from this seller on e bay


http://www.ebay.de/itm/Kawasaki-Z-1000- ... 1044243705
Top
User avatar
Z1RII
100Club
100Club
Posts: 307
Joined: 20th Jul 2007
Location: Germany

#7 PostAuthor: Z1RII » Thu Jan 22, 2015 3:49 pm

Z1 Z1A/B covers are different to Z900A /Z1000

the later covers do not have as much metall like the Z1 covers. (sorry, cannot explain correct in english) since the top yolk with it´s bolts is different.

the later MKII A4 does not have covers any more, just a ring plus the plastic cover at the front covering the brake splitter
grez
amir
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 21 guests