My z1B has develped a bad case of engine jerking at small throttle openings, say 2000rpm on a constant throttle opening, its perfect at highr speed, ie 3000rpm plus or under load. Its a bit like having kangeroo petrol if you know what I mean
before I start on the hunt for the issue - anybody had similar problems ?
Im going to check carb balnce and timing, I dont think the pilots are blocked as it accelerates and pulls well from low speed on 1/4 throttle, I suppose the pilot airway could be blocked.
When the bike was rebuilt, it would run down to 20mph in top and pull constant , that was 3 years ago
I bet its pilots but glad to hear any other suggestions
thanks
Ray
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
engine low speed "jerking"
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Try a simple elimination process first, like petrol starvation: pipes from tank, spark plugs, ht leads, caps, then move on to carbs?
Non standard Z900 - purchased from HIGGSPEED - http://www.higgspeed.com/ -
http://www.z1ownersclub.co.uk/forum/vie ... 6a7d5e816c
http://www.z1ownersclub.co.uk/forum/vie ... 6a7d5e816c
Who is online
Users browsing this forum: No registered users and 15 guests