Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Correct carb overflow pipe

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
DaveZ1
100Club
100Club
Posts: 303
Joined: 15th Sep 2011
Location: Sunderland

Correct carb overflow pipe

#1 PostAuthor: DaveZ1 » Fri Jun 28, 2013 3:49 pm

Does anyone know the OD and the ID of the overflow pipes from the carbs? all four of mine were missing and I want to replace them with the correct size/look (or as near as dammit) as the originals. (73 Z1 BTW)
Cheers, Dave.
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#2 PostAuthor: wilsonsjw11 » Fri Jun 28, 2013 4:02 pm

Dave
Z-power stock the correct size which is pretty much the same OEM.
Regards
Steve
Top
User avatar
DaveZ1
100Club
100Club
Posts: 303
Joined: 15th Sep 2011
Location: Sunderland

#3 PostAuthor: DaveZ1 » Fri Jun 28, 2013 4:21 pm

Cheers Steve, Zpower want 12 quid plus p&p. Just saw correct size fuel / breather pipe for about 2 quid per meter. So if some kind soul could let me know the correct size i may not have to make Mr Marsden any richer.!
Cheers. Dave
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

#4 PostAuthor: Mark Tiller » Fri Jun 28, 2013 4:36 pm

6mm bore and 1mm wall...8mm od
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#5 PostAuthor: wilsonsjw11 » Fri Jun 28, 2013 4:47 pm

Dave
Take your pick...I've just measured a rock hard set that came off my 73 bike but not saying they are original and they measure 7mm OD and 3mm ID.
Regards
Steve
Top
User avatar
DaveZ1
100Club
100Club
Posts: 303
Joined: 15th Sep 2011
Location: Sunderland

#6 PostAuthor: DaveZ1 » Fri Jun 28, 2013 5:48 pm

Thanks chaps, i think the smaller ones are correct.
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#7 PostAuthor: DogsbolloxofZ1B » Mon Jul 01, 2013 7:56 am

Agree with Steve,
I've got NOS ones in the bag and 3mm ID 7mm OD.

Mike
Top
User avatar
DaveZ1
100Club
100Club
Posts: 303
Joined: 15th Sep 2011
Location: Sunderland

#8 PostAuthor: DaveZ1 » Mon Jul 01, 2013 12:11 pm

Thanks for taking the trouble to measure your NOS pipes Mike, thats the size I was thinking on being correct.
The best I have found on ebay is this vaccum pipe which is the right size and should be fuel resistant,
http://www.ebay.co.uk/itm/260418204980? ... 1439.l2648

I've ordered 3 metres which should be enough for the four overflows, would be really helpfull to know the length of each as they're all different lengths if you have them off the bike mate. :wink:
I can probably guess somewhere near but it would be nice to know they're right.
Cheers, Dave
Last edited by DaveZ1 on Mon Jul 01, 2013 3:12 pm, edited 1 time in total.
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1317
Joined: 18th Jul 2008
Location: West Sussex/Central London

#9 PostAuthor: wilsonsjw11 » Mon Jul 01, 2013 12:43 pm

Dave,
Don't forget the retaining clips too :)
Regards
Steve
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 15 guests