hi all, hope you can help,took of front brake caliper to change pads, the shims or spacers fell out 2 of them one plain and one with a raised bit in the middle,from the piston side.how do they go back in any pic's or diagrams will great.tryed to look on web but no luck.
thanks all royboy.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
brakes
Moderators: KeithZ1R, chrisu, paul doran, Taffus
I think you may have dropped two pieces
1. the small anti squeal shim! zThis is usually located by small pins at the back of one of the pads, hence it goes against the piston.
2. the surround that holds the rubber dust cover, that is usually a light press fit in the caliper body.
Regardz
1. the small anti squeal shim! zThis is usually located by small pins at the back of one of the pads, hence it goes against the piston.
2. the surround that holds the rubber dust cover, that is usually a light press fit in the caliper body.
Regardz
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Who is online
Users browsing this forum: No registered users and 14 guests