Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Single front disc brake master cylinder

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Paul Whitehouse
100Club
100Club
Posts: 255
Joined: 20th Sep 2005
Location: Crawley, West Sussex

Single front disc brake master cylinder

#1 PostAuthor: Paul Whitehouse » Fri Aug 31, 2012 12:02 pm

Anyone got a front master cylinder for a single front disc setup for a zed?...not too bothered if it needs refurbishing. I'm building a `77 Z1000 special (Long, Low, Mean and Nasty...another drag zed in the projects section) and am only running a single disc setup to keep the look as period as possible for a drag bike. Cheers.
If it's too loud....too bad.
Phil Churchett Award Winner 2014
Top
User avatar
Mark Stratton
Custard Cream
Custard Cream
Posts: 574
Joined: 16th Feb 2009
Location: Southampton

#2 PostAuthor: Mark Stratton » Fri Aug 31, 2012 12:12 pm

Paul

I'm sure I have one in the depths of the garage somewhere. I will have a look later on today and let you know.

Mark
Top
User avatar
pertonpc
ZedHead
ZedHead
Posts: 1036
Joined: 3rd Sep 2009
Location: Gloucestershire
Contact:
Contact pertonpc

#3 PostAuthor: pertonpc » Fri Aug 31, 2012 1:56 pm

There's some repros avail on ebay etc. from about £60ish for single disc.
If you don't have one to repair they might be a cheaper option as you won't need new internals and they come with bar clamps and lever. Have a look.
It's expensive and fiddly to replace the internals.
From Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Top
User avatar
Paul Whitehouse
100Club
100Club
Posts: 255
Joined: 20th Sep 2005
Location: Crawley, West Sussex

#4 PostAuthor: Paul Whitehouse » Fri Aug 31, 2012 3:01 pm

Hi Chaps....thanks for the info. Mark (Pertonpc)...I've found the single disc ones on ebay for £62.00....up till now I'd only found the ones that were £90.00 !!!!....I've now purchased one of these...others had warned me that refurbishing one was a bit of a nightmare !!!!....thanks, Paul.
If it's too loud....too bad.

Phil Churchett Award Winner 2014
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1772
Joined: 12th Jun 2011
Location: Stewkley, Leighton Buzzard

#5 PostAuthor: Mark Tiller » Fri Aug 31, 2012 3:34 pm

there is a circlip which is deep inside the bore, its a right bastard
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#6 PostAuthor: z1bman » Fri Aug 31, 2012 5:01 pm

Mark Tiller wrote:there is a circlip which is deep inside the bore, its a right bastard



ITS A PIECE OF CAKE IF YOU HAVE THE SPECIAL CIR CLIP PLIERS :D :D :
Top
User avatar
Tonka
Hardcore
Hardcore
Posts: 1494
Joined: 11th Jun 2011
Location: In a pub in Warwick with a bit of luck

#7 PostAuthor: Tonka » Fri Aug 31, 2012 6:44 pm

Hi, I have one off a Z1A if that is of any use?
Inheritance? What inheritance? He spent it all on booze, women and Zed parts!
Top
User avatar
Tonka
Hardcore
Hardcore
Posts: 1494
Joined: 11th Jun 2011
Location: In a pub in Warwick with a bit of luck

#8 PostAuthor: Tonka » Fri Aug 31, 2012 6:45 pm

Tonka wrote:Hi, I have one off a Z1A if that is of any use?


Whoops should have read the tread properly. Already sorted it seems.
Inheritance? What inheritance? He spent it all on booze, women and Zed parts!
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 10 guests