Page 1 of 2
New member
Posted: Thu Oct 20, 2016 6:43 pm
Author: Julian_Boolean
Hi, my name is Julian, I own a Z1000J with 17" wheels, Zephyr swingarm, FZR1000 forks and brakes and a Unitrak head and cams and barrel, I don't know what pistons are in it. I'm in the process of getting it running properley.
I'd like to find who built it, I bought it from Guildford and it was originally registered in Guildford, previous owner knew nothing about, which is why I got a bit of a bargain.[/img]
Posted: Thu Oct 20, 2016 6:50 pm
Author: Gus
Welcome Julian.
Fire some piccies up and somebody may recognise it.
Cheers
Gus
Posted: Thu Oct 20, 2016 7:22 pm
Author: Julian_Boolean
I just need to work out how to post pictures....
There are some on Facebook if anyone wants to look
Posted: Thu Oct 20, 2016 7:32 pm
Author: paul doran
Welcome Juiian
a picture or two would be good if You can
Posted: Thu Oct 20, 2016 7:44 pm
Author: Julian_Boolean
Is it possible to upload pictures to the forum?
Posted: Thu Oct 20, 2016 8:11 pm
Author: warren3200gt
Upload to photobucket or similar then post the link with img tab above
Posted: Thu Oct 20, 2016 8:11 pm
Author: Ginger Bear
Welcome Julian,
Sounds like an interesting bike you have there.
There is/was a guide to posting pics somewhere, but I'll be fooked if I can find it.
Posted: Thu Oct 20, 2016 9:07 pm
Author: Richard L
Hi Julian
Welcome, I saw your bike on facebook at the weekend and it looks very smart , plenty of ELR reps here on this site from original to much modded , lots of help and good tips available here too.
All the best
Richard
Posted: Thu Oct 20, 2016 9:07 pm
Author: SVENLEATHER
I think this was the link to how to upload pictures.
http://www.z1ownersclub.co.uk/forum/vie ... hp?t=14667
But look like it's been taken down.
Posted: Fri Oct 21, 2016 8:07 am
Author: G
Welcome aboard
Posted: Fri Oct 21, 2016 1:19 pm
Author: Julian_Boolean
Please see
http://www.therevcounter.co.uk/threads/109807-Z1000J-Eddie-Lawson-Replica-refurb for a write up on what I've been doing on it and photos, assuming it's okay to link to threads on other forums
Posted: Fri Oct 21, 2016 1:58 pm
Author: Julian_Boolean
How it was when I got it
Posted: Sat Oct 22, 2016 7:07 pm
Author: jphaynes669
Welcome julian. Good tidy project you've got yourself, nice one !
Posted: Sat Oct 22, 2016 8:20 pm
Author: Julian_Boolean
It looks better in the photo than it is, you can't see the stained paint or the birds nest wiring.
Posted: Sun Oct 23, 2016 9:50 am
Author: Al
Welcome Julian, get it up in the projects section. What is the inch diameter circle just below the side panel,... cross tube? High quality reproduction side panels are available at discount through the club.
AL