Page 1 of 1
project Z900-1000,,A,B,A4,A1,A2,B4,Ltd
Posted: Tue Apr 07, 2009 6:25 pm
Author: BShaw
I got my frame today (cheers Phil) so my bitsa on the cheap Z project starts from here I spose. I got a nice new shiny green bottle of argon mix as well in readiness for bracing. I am not planning a shiny showpiece but a well handling, quick all year round bike from whatever parts that fit and function the best, I have a set of crank cases on the way (Cheers Ian) and I plan to finance most of it from the sale of a big pile of 750 H**** bits I have (see they are good for something).
I have loads of Z bits so won't need that much. I will do some pictures when I get my laptop back (with a new hard drive) poxy things are more trouble than bikes.
The plan is to get it done in 18 months coz my life changes then and it would have to go on hold.... We will see !
I am all exited as i haven't built a bike for about 10 yrs, first stop Motaliner to get frame checked.
Will keep you posted.
Baza
Posted: Tue Apr 07, 2009 9:28 pm
Author: PJ
All the best with the project baza, get the pics on here asap,
What happens in 18 months? can you answer that?
cheers
pj
Posted: Tue Apr 07, 2009 10:03 pm
Author: BShaw
I retire from 2 jobs buy a derelict, get my tools out and start again where I was when I was 20 so won't have much time for toys for a while.
Baza
Posted: Wed May 06, 2009 4:14 pm
Author: BShaw
Not a bad start, only a month on and the frame met the cases today ... then they both met their older brother
A little bit of work on the bottom end and we are up and runnin
Baza
Posted: Tue May 19, 2009 10:22 pm
Author: BShaw
Did some work on the frame bracing this afternoon
As I don't have a vice my fudging fingers are sore from keep catching them with the grinder
hopefully sort some engine mounts out tomorrow or thursday.
Posted: Thu May 21, 2009 11:10 am
Author: KWACKERZ1
Good luck with the project Baz I shall watch with interest.
Posted: Thu May 21, 2009 6:56 pm
Author: BShaw
Thank you... I have spent most of the afternoon melting wire around the frame (I wont call it welding cos it would make a welder cry) will post more pics soon.
Regards
Baza
Posted: Fri May 22, 2009 3:23 pm
Author: BShaw
melted some metal near the frame yesterday... 1/2 way there
Posted: Fri May 22, 2009 8:25 pm
Author: Pigford
Baza, good stuff matey.... No better way than "hands on" learn - as - you - go
Wish I could weld... it'd be bl**dy handy
Keep the photo's comin'
Real gritty project
Posted: Fri May 22, 2009 9:30 pm
Author: paul doran
Barry if You need anything let Me know
Posted: Sat May 23, 2009 12:18 am
Author: BShaw
cheers lads thought I was on my own, Blade footrests is what i need.. think i have them sorted. then its just time, any body got some to spare ?
Posted: Sat May 23, 2009 6:48 am
Author: Ginger Bear
Posted: Sat May 23, 2009 7:41 am
Author: surfer69
Looking promising, I hope you didn't do the welding with the crankcases in!
Posted: Sat May 23, 2009 9:29 am
Author: BShaw
GB, Sorry mate I have to look after them myself, got some real bad news last night, the one with the biggest charlie's is leaving... Im'e gonna miss them
Surfer, I did, didn't think of that... didnt want to distort any thing... will have a look later..
........ allow you a little more time with the bike. 
