Z1OwnersClub GB

I`ve given a few other members some of the correct backing foam that is fixed to the clock bracket and thought some of you may be interested to see how I did mine.

Starting with my freshly painted bracket.......



And freshly rebuilt clocks........



I made some templates out of card and checked that they fitted correctly.



I then drew the shape onto the foam.....



And cut out all 4



I used a hydraulic fitting size 12L and hammered it onto a block of wood to make the circular cut out.



Until I ended up with all 4. You will notice that one has a semicircular piece cut out on the edge. I do not know why this is there but followed the shape anyway.



I made sure that they fitted the backs of the clocks



Before gluing them into place



And finally the worst part...............waiting 24 hours for the glue to properly cure.

Nice one

Very professional looking chris well done.

beats double sided tape

Very neat job - wish i had that foam when i did my clocks

Still got plenty. Possibly more available.

Will supply to anyone FOC

Hi TC ,great job, how mutch £ to cut out a set and post to me

ludders wrote:Hi TC ,great job, how mutch £ to cut out a set and post to me

Great idea - me too

Arrived today - superb

I will try fitting them later(as long as the kids let me)

Cheers again Chris

Arrived to day,superb job ,
many thank's Chris

Hi TC

Not that I'm jumping on the bandwagon or nuffink.......

but how's about a set for me too?...

Cash waiting - It'd be nice to have one less job to think about

Er any chance of buying a set, I get my bracket back next week freshly powdercoated.

Mainekz. I diid give you enough for at least 2 sets of clocks..............or did it blow away again

If you want to get it back to me I could cut you a pair out and sort out Padders at the same time.

I`ve just given my last bit to a member but could get more next time I`m in Wycombe.