Page 1 of 3

Z1000 owner again after 22 years

Posted: Mon Apr 07, 2008 6:56 pm
Author: CJE
Hi Guys, About 6 weeks ago I came across this site and it rekindled my love of early Z,s, I posted some old pictures of my last Z900 which I had bored to 1200 and supercharged but that was when I was in my late 20?s, After a bit of hunting on eBay I managed to find a project that I liked the look of, I wanted something that had been slightly modified so on Sunday I chose the worst day of the year and drove all the way to London from Newquay in Cornwall in the snow to pick it up. I have posted a picture of the old bike and some of my new bike. I plan to swap some of the parts back to standard, headlight, foot pegs, indicators but keep the swingarm and rear calliper, I think the bike has been stored since 1993 but the previous owner plastered it in WD40 and it has no rust or corrosion, anyway I am well happy ,thanks

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Posted: Mon Apr 07, 2008 7:12 pm
Author: Pigford
CJ, that look a bloody nice start for a project... LOVE that seat... :twisted:

Posted: Mon Apr 07, 2008 7:49 pm
Author: Davy Doherty
I think we talked about that bike just a few weeks ago Nice bike to start with,,,,

Posted: Mon Apr 07, 2008 7:50 pm
Author: Padders
Looks like a nice starting point CJ. saw the bike on e bay and would have bid if I had not just bought my Z1000. Keep us informed of your progress and hope to see you around on her this summer.

Welcome back to Zed Land :D

Posted: Mon Apr 07, 2008 8:19 pm
Author: CJE
the bike came with the standard foot pegs, grab rail, rear indicators, a brand new Harris exhaust 4 into 1, a Clymer manual, Z power parts list and bits and bobs, the bike has quite a lot of history and have been contacted by the original owner from 18 years ago, i have also got the spec sheet for the engine, 1075 kit, head polished, ported, gas flowed with the inlet opened to suit 33mm carbs, mega cycle 460/480 cams fitted, 10.5:1 cosworth pistons, dyna 5 electronic ignition, all engine work carried out by Ray Debben.

Posted: Mon Apr 07, 2008 10:52 pm
Author: Ed Z1-R
Thats a nice ZeD,

Posted: Mon Apr 07, 2008 11:33 pm
Author: ollie
going to be a nice project ,keep the pics coming cje

Posted: Tue Apr 08, 2008 9:11 am
Author: ROZZER
Fantastic start point, please tell me your gonna junk them 'orrible blue cap head screws though!

Posted: Tue Apr 08, 2008 9:47 am
Author: RALPHARAMA
Looks a gorgeous bike but I have to agree that the nasty blue screws really should be sold to a 16year old for his M***D along with the silly head lights!

Posted: Tue Apr 08, 2008 12:33 pm
Author: CJE
I can tell that you are not keen on them little blue covers, well i felt the same and removed them this morning, i will post some more pics tonight but if anyone would like them covers and are a bit embarrassed to post just send me a PM :wink:

Posted: Tue Apr 08, 2008 1:00 pm
Author: bunnysZ
CJE when pigford pm's you for those blue screw heads . make sure you name and shame :D

Posted: Tue Apr 08, 2008 1:00 pm
Author: Murph
Great looking zed thats only going to get better
looking forward to seeing it finished :wink:

Posted: Tue Apr 08, 2008 5:57 pm
Author: CJE
Took the day off today, had to get started and sort a list out of things to buy, and strip off things i don't want to use. originally i started out wanting the pro-stock look, and will probably end up that way but the parts that came with the bike are too good not to use. anyway here are s few more pictures of my day

Image

Image

Image

Image

Image

Image

Posted: Tue Apr 08, 2008 6:45 pm
Author: Pigford
That looks bloody gorgeous, that paint job is legend :wink:
As for those blue screw covers..... thanx, but NO THANX :evil:

Posted: Tue Apr 08, 2008 7:26 pm
Author: noelmcguinnessz900
hi cje thats a very cool bike you got it sounds like it should go as well as it looks im only up the road from you in bodmin, PM me and mabey have a natter over a pint