Page 1 of 8
HowieD's 'arris
Posted: Tue Feb 12, 2008 9:50 pm
Author: HowieD
Posted: Tue Feb 12, 2008 11:33 pm
Author: rickman CRR
Nice project mate.
Basically
1 right click the photo you want to copy. This must have a URL address from a web page
2 click properties
3 highlight the URL address and copy and paste to your reply box.
4 then add [img]at%20the%20start%20of%20the%20URL%20and[/img] at the end then
5 click preview to see if its worked, if so, add any comments with message and press submit.
Have a go with your second pic
Posted: Wed Feb 13, 2008 7:49 pm
Author: paul doran
nice Arris
Posted: Wed Feb 13, 2008 8:39 pm
Author: HowieD
Great stuff! Thanks for your help.
Here it is a few years ago after I'd taken it off the road as my job had me all over the place with not much time on my hands.
P&M Seat and Original Wheels, Forks & Brakes (With Lockheed's tho.)
regards
H
New Front end
Posted: Wed Feb 13, 2008 8:47 pm
Author: HowieD
And this is supposed to fit with a bit of fettling.
regards
H
Posted: Fri Feb 15, 2008 5:27 pm
Author: Jon
Got a lot of potential there. Mag 4 tank looks good too. Had to chop my mag 2 tank to get same look. And I wanted to be able to stare down bellmouths.

Posted: Fri Feb 15, 2008 6:57 pm
Author: HowieD
Aye up,
It came with that tank as it is, was a real bugger to get all the welds smoothed down and polished up.
I actually ran it pretty much like that from 1996. There was an article about it in the Z1OC Mag then or early '97. Between building it and laying it up it did about 25K miles. There's a subframe under the P&M Seat to take the weight of Throw-overs, which it had most of the time. LREB (Long Range Endurance Bike), as in going to the endurance races! If you stay over after races the tracks usually open up.Also Despite have the original Wheels; twisty stuff was good fun: if a corner tightened up, lean over more! Spa especially!
Only trouble was all the shit getting into the carbs and the under seat electrics from the back wheel. Hopefully that will be solved this time with a descent Hugger and all the wiggly bits are going under the tank.
regards
H
Posted: Tue Jul 26, 2011 5:11 am
Author: HowieD
What's happen to the rest of this thread ? There were 6 other pages and loads of pics in it ??
H

wie
Posted: Tue Jul 26, 2011 7:12 am
Author: Ginger Bear
All gone Howie......... Read all about it here;
http://www.z1ownersclub.co.uk/forum/vie ... hp?t=14216
Lost about 35 pages of my 1170R project thread too.

Bit of a pisser really.

Posted: Tue Jul 26, 2011 9:04 am
Author: HowieD
ah right- must pay more attention.
I'll stick all the pics up again when I get home.
Bad luck indeed
H

wie
Posted: Thu Aug 04, 2011 2:20 pm
Author: HowieD
A few re-posts to get back up=to=date.
Before, after a five year lay up:

Posted: Thu Aug 04, 2011 2:23 pm
Author: HowieD
New Back Wheel & Front end:

Posted: Thu Aug 04, 2011 2:29 pm
Author: HowieD
Posted: Thu Aug 04, 2011 2:38 pm
Author: HowieD
Fiddy Bits:
Old Battery/ New Battery:
Where it sat and where it's going:

Posted: Thu Aug 04, 2011 2:41 pm
Author: HowieD
Under tank tray:
how it was before:
