Page 1 of 1
Things I get for working
Posted: Sat Jan 18, 2014 5:31 pm
Author: gpjes
Just for a laugh I bought a very nice straight frame and logbook for a zrx1100 c1 off eBay reduced for chrimbo from £149 to £112 shipped to the door just as an experiment to see what I could fit engine wise this week I got called out to a breakers in bradford and ended up with a decent seat wiring harness fuse box and best of all a zrx11 swingarm with spindle and bearings for bits for a karcher pressure washer think I might build one as I've now got the bones nice to look on uk part list and find everything for sale just about I was going to sell my TT500G but I don't want to let go yet, the 1000RX runs really well now that its running on Shell Pemium gogo juice so does the lawnmower the Z1075st has new float jets and doesn't leak that too is on a slave tank of expensive juice and new proper K&n's far better than the distorted emgo ones, so chasing zrx bits if anyone's got owt message us.
Ta Jes
Posted: Sat Jan 18, 2014 5:38 pm
Author: Fred the Zed
Its begging for an unrestricted ZZR1100 motor.... 147hp ZRX, now that would be interesting!
Fred
Posted: Sat Jan 18, 2014 6:25 pm
Author: Jay1969
Sounds interesting, keep the pics coming.
Posted: Sat Jan 18, 2014 6:57 pm
Author: Compo1955
You could have a look on the ZRXOC site, plenty of bits for sale there and good info if you need it.
Posted: Sat Jan 18, 2014 8:10 pm
Author: Big John
Fred the Zed wrote:Its begging for an unrestricted ZZR1100 motor.... 147hp ZRX, now that would be interesting!
Fred
Just need the ZZR cams as the ZZR head and carbs won't fit in the frame.
Posted: Sat Jan 18, 2014 10:04 pm
Author: harrythemagnum
There are a few combinations, using ZRX, ZZR and GPZ E parts.
Posted: Sat Jan 18, 2014 10:28 pm
Author: neilbarrett
a full zrx1200 sold for £775 on the mod site this wk
Things I get for working
Posted: Sun Jan 19, 2014 9:50 am
Author: gpjes
Yep I know the zzr won't fit there was one in the doorway with carbs & they were at an horrific angle to the head, dropped the frame off at Triple S for powder coating during the week should get it back next week sometime, I really need to make an effort to get some piccies off me iPhone on here, in two minds what finish to put on swingarm, it certainly is a nice looking item, tho short of the rubber chain guard and the gold anodised adjusters but for eighty quid for the bits I,m not complaining, the wiring harness spent a couple of nights on the underfoor heating in the conservatory and straightened out great no cuts or damaged bits just got to check for continuity with tester.
Thanks for the replies and advice keep em coming.
Jes
Posted: Sun Jan 19, 2014 12:50 pm
Author: harrythemagnum
The ZZR carbs work ok on a ZRX, I have them on mine.
Some bits are hard to find, deffo keep an eye on the ZRXOC.