Z1000J1
Posted: Fri Jan 11, 2013 8:54 am
http://www.oldskoolperformance.com/foru ... 170#p37170
Currently only on OSP as it's easier to post photos.
Currently only on OSP as it's easier to post photos.
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
Z1000J1
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=7&t=23601
Page 1 of 2
Posted: Fri Jan 11, 2013 9:48 am
You lazy Sod Jack
Re: Z1000J1 ELR CLONE
Posted: Fri Jan 11, 2013 10:19 am
london calling wrote:http://www.oldskoolperformance.com/forum/viewtopic.php?f=6&t=4225&p=37170#p37170
Currently only on OSP as it's easier to post photos.
Just copy and paste the entire post from there to here and the piccie links will will be copied too
That's what i do now after the kids showed me how.
Oh my! how they laughed when they saw me re-writing entire posts for other forums
Posted: Fri Jan 11, 2013 11:18 am
Cheers Paul 
I've just started putting together a 1981 Z1000J1 based Lawson clone.
The rolling chassis,has got a shallow brace Davida Moto s/arm,GPz 750 Turbo wheels & discs.
The motor is a re-built 1105 Wiseco,Ledar kitted carbs and an original Harris 4-1.
I also discovered that the Davida rear axle is 20mm diameter and the GPz wheel bearings and spacer are 17mm
It's been a few years since I swapped the 7 spoke wheels for the later GPz type.
Luckily for me,Keith at Quest Engineering in Loughborough sorted me out
I've just started putting together a 1981 Z1000J1 based Lawson clone.
The rolling chassis,has got a shallow brace Davida Moto s/arm,GPz 750 Turbo wheels & discs.
The motor is a re-built 1105 Wiseco,Ledar kitted carbs and an original Harris 4-1.
I also discovered that the Davida rear axle is 20mm diameter and the GPz wheel bearings and spacer are 17mm
It's been a few years since I swapped the 7 spoke wheels for the later GPz type.
Luckily for me,Keith at Quest Engineering in Loughborough sorted me out
Posted: Fri Jan 11, 2013 3:59 pm
LUDITES 
Posted: Fri Jan 11, 2013 4:32 pm
I think you mean LUDDITES,Miss Piggy
Posted: Fri Jan 11, 2013 4:58 pm
london calling wrote:I think you mean LUDDITES,Miss Piggy
Stop being Perdantick
Posted: Sat Jan 12, 2013 11:20 am
Pigford wrote:london calling wrote:I think you mean LUDDITES,Miss Piggy
Stop being Perdantick
I think you mean Pedanprick
Posted: Sat Jan 12, 2013 6:19 pm
London i am unable to view any photos on the link 
Posted: Sat Jan 12, 2013 6:53 pm
Can you view any photos of the other projects,etc on OSP ??
Posted: Sat Jan 12, 2013 6:56 pm
Must be at your end Mr. Puffin , they open for me and i'm a computer chimp
Posted: Sun Jan 13, 2013 10:50 am
london calling wrote:Can you view any photos of the other projects,etc on OSP ??
I can view most photo attachments but on several threads the forum states
"You do not have the required permissions to view the files attached to this post."
Posted: Sun Jan 13, 2013 10:54 am
Z1parR wrote:Must be at your end Mr. Puffin , they open for me and i'm a computer chimp
i`m not much better
I think it maybe because i have registered and somehow they have the forum permissions set to limit access, until you have an X amount of posts
Posted: Sun Jan 13, 2013 9:20 pm
Photo,etc added for my good friend in the Emerald Isle and Mr Puffin.
Posted: Sun Jan 13, 2013 9:24 pm
Sorted a few more bitz out today(saturday) and more stuff arriving next week.
I'm considering a different look for the bike now,will try it out next week
I'm considering a different look for the bike now,will try it out next week